B&M, Stage 3 Head, Gearbox, Chipped ECU...Loads!! NOW WITH PICS!
Thread Starter
I've found that life I needed.. It's HERE!!
iTrader: (1)
Joined: Mar 2009
Posts: 1,377
Likes: 0
From: Portsmouth
Time has come to sell all my old engine parts as im now doing a full zetec turbo conversion! All parts were in fully working order and running 2months ago, only just taken the engine out.
Prices not including postage.
B&M short shifter very good condition - £170 Sold

Stage 3 big valve head with Kent CVH35 cam and vernier pully. This is a Crosshatched Head which are fairly rare which means it has thicker valve walls so making it stronger. This head was off a non turbo 1600cvh that had done 70,000miles. All work done by Andrew Weston of Cylinder Head Developments. Have receipts for all work and parts - Head and cam only done 1000miles max (basically a brand new head!) also comes with the sandwhich plate for the MFI inlet that is Port Matched. £400 ono




Standard RST LSD Gearbox - Came with car when i bought it, never had any problems with it no noises, oil changed regularly, will throw in standard clutch - £100 (pick up only)
Group A Coil - As new done 50miles max - £20 - sold, awaiting payment

Fuel Lines & Injectors- All red fuel lines and injectors for MFI setup - £15

Metering Head - In perfect working order - £45 sold - awaiting payment

Chrome CVH Rocker cover - Good condition few scratches - £25

Chipped ECU - Beleived to be an Ahmed Bayjoo chip, car was running just over 200bhp on it, will get pics up of chip - £60 sold - awaiting payment
MFI Inlet - Standard MFI Inlet with all sensors etc - £25
Taking pics of everything as i speak, will get them up asap! If you got any questions about the parts just drop me a PM.
Cheers
Matt
Prices not including postage.
B&M short shifter very good condition - £170 Sold

Stage 3 big valve head with Kent CVH35 cam and vernier pully. This is a Crosshatched Head which are fairly rare which means it has thicker valve walls so making it stronger. This head was off a non turbo 1600cvh that had done 70,000miles. All work done by Andrew Weston of Cylinder Head Developments. Have receipts for all work and parts - Head and cam only done 1000miles max (basically a brand new head!) also comes with the sandwhich plate for the MFI inlet that is Port Matched. £400 ono




Standard RST LSD Gearbox - Came with car when i bought it, never had any problems with it no noises, oil changed regularly, will throw in standard clutch - £100 (pick up only)
Group A Coil - As new done 50miles max - £20 - sold, awaiting payment

Fuel Lines & Injectors- All red fuel lines and injectors for MFI setup - £15

Metering Head - In perfect working order - £45 sold - awaiting payment

Chrome CVH Rocker cover - Good condition few scratches - £25

Chipped ECU - Beleived to be an Ahmed Bayjoo chip, car was running just over 200bhp on it, will get pics up of chip - £60 sold - awaiting payment
MFI Inlet - Standard MFI Inlet with all sensors etc - £25
Taking pics of everything as i speak, will get them up asap! If you got any questions about the parts just drop me a PM.
Cheers
Matt
Last edited by mattseries2; Sep 9, 2010 at 08:07 PM.
Trending Topics
Thread Starter
I've found that life I needed.. It's HERE!!
iTrader: (1)
Joined: Mar 2009
Posts: 1,377
Likes: 0
From: Portsmouth
Thread Starter
I've found that life I needed.. It's HERE!!
iTrader: (1)
Joined: Mar 2009
Posts: 1,377
Likes: 0
From: Portsmouth
Thread Starter
I've found that life I needed.. It's HERE!!
iTrader: (1)
Joined: Mar 2009
Posts: 1,377
Likes: 0
From: Portsmouth
Thread
Thread Starter
Forum
Replies
Last Post
big_Rad
General Car Related Discussion.
8
Sep 15, 2017 09:36 AM
CabrioTurbo
General Car Related Discussion.
1
Aug 1, 2015 11:04 AM




