Help Building zetec turbo
#1
15000
Thread Starter
Join Date: Jan 2006
Location: London
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Help Building zetec turbo
Hi Guys new to the site first post and everything.
Finding it hard to search for any 1.8 zetec turbo conversion's for Fiesta MK5 zetec s. Everybody seems to be heading towards the puma conversion. I've scoped out the 1.8 lump out of a focus. i have listed a few stuff i need, wanted to know if these are Necessary or have l left anything out?
2mm/3mm Decompression Plate
2 new head gaskets
Rover turbo inlet manifold/ adapter plate from Ferriday engineering
Frst Management OFAB Loom
Frst gearbox with LSD from Erst
focus RS exhaust manifold or RS turbo
Brief break down
Cheers
Finding it hard to search for any 1.8 zetec turbo conversion's for Fiesta MK5 zetec s. Everybody seems to be heading towards the puma conversion. I've scoped out the 1.8 lump out of a focus. i have listed a few stuff i need, wanted to know if these are Necessary or have l left anything out?
2mm/3mm Decompression Plate
2 new head gaskets
Rover turbo inlet manifold/ adapter plate from Ferriday engineering
Frst Management OFAB Loom
Frst gearbox with LSD from Erst
focus RS exhaust manifold or RS turbo
Brief break down
Cheers
#4
15000
Thread Starter
Join Date: Jan 2006
Location: London
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
I have already purchased the 2mm decom plate, but regards to using proper pistons which ones should be used in this case of getting over 190ish BHP. How far could you go on standard pistons??
Was just double checking about the injectors to use and what mounts, would they need to be custom made?
Cheers
Was just double checking about the injectors to use and what mounts, would they need to be custom made?
Cheers
#5
ZT massive! Aight!
Join Date: May 2005
Location: Littlehampton, West sussex
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
#7
15000
Thread Starter
Join Date: Jan 2006
Location: London
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Cheers guys. Was wondering if a 5th injector kit is needed for this, has i was told by a garage that does zetec turbo's for the MK3 in Loughborough. Also i'm based in southeast london does anyone know where i could get the engine fitted/ mounts made up?
dj conflict pm me on a price/pics.
dj conflict pm me on a price/pics.
Thread
Thread Starter
Forum
Replies
Last Post