Escort cossie wheels
#1
Wahay!! I've lost my Virginity!!
Thread Starter
Escort cossie wheels
Hi.
Just a question. Does anyone know if the original escort cossie wheels the 16inch fit on mk6 escort? I know they are a deeper dish. Has anyone fitted to theirs? Have you got pics you could share and what adjustments did you have to make to fit them?
Cheers peeps
Just a question. Does anyone know if the original escort cossie wheels the 16inch fit on mk6 escort? I know they are a deeper dish. Has anyone fitted to theirs? Have you got pics you could share and what adjustments did you have to make to fit them?
Cheers peeps
#4
Wahay!! I've lost my Virginity!!
Thread Starter
I was also told there are a set made to go on a mondeo that look like the cossie wheels but are better than the gti style?? Anyone know and have??
Thanks
Thanks
#5
Moderator
iTrader: (11)
escort cossie wheels are 8j wide and et25 which means they stick out too far on normal escorts, and having to stretch tyres to make them fit is silly and whats more bloody dangerous as normal escorts handle shite with them on, mondeos had exactly the same look in 16" either 6.5j or the more desireable 7j width with correct escort offset of around et35-40, gti wheels are only 15"
#7
PassionFord Post Whore!!
As said you wil have to have 195 45 16 tyres on. You will have to roll the arches to if you want passengers in the back. I bought an arch roller and did them myself (I have one for sale)
As 1-PD says handling isn't the best, but saying that once you get used to them its fine. I can throw mine into corners now confidently and don't notice it anymore. Well worth the effort as I think cosies on a mk6 look awesome.
Was at ford fair yesterday and had nothing but good comments on how the wheels suited the car
As 1-PD says handling isn't the best, but saying that once you get used to them its fine. I can throw mine into corners now confidently and don't notice it anymore. Well worth the effort as I think cosies on a mk6 look awesome.
Was at ford fair yesterday and had nothing but good comments on how the wheels suited the car
Trending Topics
#9
Wahay!! I've lost my Virginity!!
Thread Starter
So would i have to roll the inner arches on the front and back? How hard is that to do? Not much of a mercanic me.
The car is used daily as my family motor so...
Love the look on there mate. Excatly what i wanna do.
I was also asvised to put on some cyclone arches all round to stop the wheels from sticking out.
The deepness of the cossies you just cant beat.
The car is used daily as my family motor so...
Love the look on there mate. Excatly what i wanna do.
I was also asvised to put on some cyclone arches all round to stop the wheels from sticking out.
The deepness of the cossies you just cant beat.
#10
PassionFord Post Whore!!
No I just had to slightly roll the rears.
Ive go the too that does it for you dead easy.
The fronts don't catch.
They don't stick out of the arches so no need for anything else.
In my opinion mondeo alloys look nothing ike cossies like you say its all about the depth.
Ive go the too that does it for you dead easy.
The fronts don't catch.
They don't stick out of the arches so no need for anything else.
In my opinion mondeo alloys look nothing ike cossies like you say its all about the depth.
#12
Wahay!! I've lost my Virginity!!
Thread Starter
Nice one. Ill have a watch of that.
My only other concern is that the wheels are 225 aint they? So whats the issues if any of putting 195 tyres on. ??
P.s got any more pics?
My only other concern is that the wheels are 225 aint they? So whats the issues if any of putting 195 tyres on. ??
P.s got any more pics?
#14
PassionFord Post Whore!!
#15
Wahay!! I've lost my Virginity!!
Thread Starter
That looks fresh mate. Liking it.
So apart from the kerbing issue on the wheels is there anything elses that could cause a problem??
Have you left your ride hight the same or has that been dropped?.
So apart from the kerbing issue on the wheels is there anything elses that could cause a problem??
Have you left your ride hight the same or has that been dropped?.
The following users liked this post:
Fordmad! (04-08-2015)
The following users liked this post:
STeve (04-08-2015)
#20
Wahay!! I've lost my Virginity!!
Thread Starter
Really do love the look on the mk6. When you mentioned about the arches. Is it just the outer side? Nothing need doing on the inside? And what about front?
Sorry to go on just trying to get as much advice as poss before the final decision.
Sorry to go on just trying to get as much advice as poss before the final decision.
#21
Wahay!! I've lost my Virginity!!
Thread Starter
Also anyone else got any pics with the cossie wheels on??? And even with the mondeo 16 inch cossie style so i can see comparison. Cheers
#23
PassionFord Post Whore!!
Its litrally just the rear outer lip. Tke wheel off, attatch the roller and it just pushes the lip up slightly so that it doesn't catch the tyre. Takes about 5 minutes to do. Takes longer to take the wheel off
#24
Wahay!! I've lost my Virginity!!
Thread Starter
The gti and mondeo wheels defo dont have the stance as the cossie wheels.
Cos im a bit simple im double checking with the 2 cars nose to nose the one on the right is with mondeo wheels right???
Cos im a bit simple im double checking with the 2 cars nose to nose the one on the right is with mondeo wheels right???
#25
Wahay!! I've lost my Virginity!!
Thread Starter
I just wanna make sure i can do it all right so theres no issues once done.
#26
PassionFord Post Whore!!
Id say the one on the left is the mondies look bigger. Theres no comparison for me mondies are mondies cossies are cossies.
Mine did crack slightly but I have plans for a respray so wasn't bothered. If you heat it up first that will help
Mine did crack slightly but I have plans for a respray so wasn't bothered. If you heat it up first that will help
#27
Wahay!! I've lost my Virginity!!
Thread Starter
I make you right there is no comparison.
Well if theres nothing more i need to know then i defo got to make a decision now then.
Just a shame its not more straight forward lol
Well if theres nothing more i need to know then i defo got to make a decision now then.
Just a shame its not more straight forward lol
#29
Wahay!! I've lost my Virginity!!
Thread Starter
The effort has made it worth while cos the look is the bees knees in my opinion. Theres a red one on a pic page that has em and looks the tits.
#31
Wahay!! I've lost my Virginity!!
Thread Starter
Yeah thats the one. They done well with that and thats the look id like to go for. Prehaps ill try find out who it is and ask about wheels just for another opinion. Another one cant hurt to put my mind at ease hahahah
#36
Wahay!! I've lost my Virginity!!
Thread Starter
1-PD, your telling me with the difference in getting hold of parts.
I had rs200 and what you would call simple parts to get were a nightmare.
I now have a GTi as more cost effective in all aspects and as you say iv seen more rs2000 in a bad way for sale than GTi in general. or maybe im looking in the wrong places lol
I had rs200 and what you would call simple parts to get were a nightmare.
I now have a GTi as more cost effective in all aspects and as you say iv seen more rs2000 in a bad way for sale than GTi in general. or maybe im looking in the wrong places lol
#38
Wahay!! I've lost my Virginity!!
Thread Starter
yeah i hear that mate.
Iv had a right result. picked one up 57000 miles from new with all mots to support.
not rust any where and all original apart from cat back exhaust and some black wheels which will be changed.
not as fast as my rs2000 obviously but still nice to drive i think
Iv had a right result. picked one up 57000 miles from new with all mots to support.
not rust any where and all original apart from cat back exhaust and some black wheels which will be changed.
not as fast as my rs2000 obviously but still nice to drive i think