FRST bufty work part 1
#1
Regular Contributor
Thread Starter
Join Date: Nov 2004
Location: Cleveland
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
FRST bufty work part 1
Just thought id share some pics of what Im upto at the moment. There is a lot of time, and money being put into tubby lately with the decision being made to run in concours this year. I done some work about 3years ago however its time to get the rear discs, coilovers, 6 pots on and the whole lot blasted and coated.
this is tubbys usual postition for 10months of the year, however this time its been almost 2 years!
How many of these are stil around?
Looking rather dull........not good enough!!!
Atleast this lasted
Yes, I am sad enough to autosol my exhaust
Been well busy these few weeks, finally parts are starting to come back all lovely and powder coated, got cracking cleaning up the arches and heres a mid prog pic.
just needing a clearcoat ontop of that before i finish otherside and bolt the new H&Rs in place.
Started again last night, so here is a few more snaps, OSR arch almost compleate, just waiting for laquer to dry now.
Im hoping someone can clarify but it dosent matter which way I put the bush?
Started to fit up the mudflaps
bottom isnt square and it looked cock eyed to me, so try again.........
almost done now, coilover in, flap fitted
Right, break time, then back to the NSR arch!
Finally got my new brakes this morning after about 6 weeks. You know the wait was definately worth it.
Biggest that will go behind the 15s safely, must admit the finish is impeccable... A Very very happy Tubby!
another update.
Petrol tank.
taking the bias valve apart to blasting, looks well scabby!
1st day of the bank holiday and its ful steam ahead, got some more little bits back from powder coaters however they forgot to do my hubs!!!!
so that will mean the rear set up cannot get finished this weekend however 90% can be done.
Lifted up the front today and made a start on fitting coilovers and the brakes up front.
all be coming back off in the morning, prob with fitting which needs urgent attention.
knew it was too good to be true.
all the coilovers are on today, brakes wont fit due to the disc being a fraction too thick, exhaust is off for a polish so in the meantime i carried on painting the underside and coating the rear brake caliper/mounts.
Spoke to Tarox today and new set of calipers on order, cutting it very very fine with getting ready for next week.
this is tubbys usual postition for 10months of the year, however this time its been almost 2 years!
How many of these are stil around?
Looking rather dull........not good enough!!!
Atleast this lasted
Yes, I am sad enough to autosol my exhaust
Been well busy these few weeks, finally parts are starting to come back all lovely and powder coated, got cracking cleaning up the arches and heres a mid prog pic.
just needing a clearcoat ontop of that before i finish otherside and bolt the new H&Rs in place.
Started again last night, so here is a few more snaps, OSR arch almost compleate, just waiting for laquer to dry now.
Im hoping someone can clarify but it dosent matter which way I put the bush?
Started to fit up the mudflaps
bottom isnt square and it looked cock eyed to me, so try again.........
almost done now, coilover in, flap fitted
Right, break time, then back to the NSR arch!
Finally got my new brakes this morning after about 6 weeks. You know the wait was definately worth it.
Biggest that will go behind the 15s safely, must admit the finish is impeccable... A Very very happy Tubby!
another update.
Petrol tank.
taking the bias valve apart to blasting, looks well scabby!
1st day of the bank holiday and its ful steam ahead, got some more little bits back from powder coaters however they forgot to do my hubs!!!!
so that will mean the rear set up cannot get finished this weekend however 90% can be done.
Lifted up the front today and made a start on fitting coilovers and the brakes up front.
all be coming back off in the morning, prob with fitting which needs urgent attention.
knew it was too good to be true.
all the coilovers are on today, brakes wont fit due to the disc being a fraction too thick, exhaust is off for a polish so in the meantime i carried on painting the underside and coating the rear brake caliper/mounts.
Spoke to Tarox today and new set of calipers on order, cutting it very very fine with getting ready for next week.
#6
Regular Contributor
Thread Starter
Join Date: Nov 2004
Location: Cleveland
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
so so angry, so so pi$$ed off. nothing going right, even the simplest of jobs are making themselves a pain!!!!!!!!!!!!!
but thanks for the kind comments chaps.
but thanks for the kind comments chaps.
Trending Topics
#8
I've found that life I needed.. It's HERE!!
Join Date: May 2004
Location: Cardiff
Posts: 1,224
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Gaz7
Looks fantastic mate, now two of us bufties have the red RS mudflaps
Great work
Gareth
Great work
Gareth
Kev, awesome work matey, You'd think it was my car, u even have the same wheels
#11
Regular Contributor
Thread Starter
Join Date: Nov 2004
Location: Cleveland
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
update..........
after hours of messing around over the weekend, some...and i mean some work got done on making a handbrake bracket and fitting the mk5 handbrake lever...............
you would never recognise it from that pic above would u.
time to push the bearings back into the hubs and DISASTER STRIKES!!!!
time to invest in that press i been promising myself.
In the meantime, after lots of I got the fuel filler back in and put the beam back into position.
got there in the end...............nearly trial fit for handbrake cable which is a real pain to sort!!!!
disc fitted, pads in, caliper fixed in..........still no f*&^*(& handbrake though........but it looks better.
after hours of messing around over the weekend, some...and i mean some work got done on making a handbrake bracket and fitting the mk5 handbrake lever...............
you would never recognise it from that pic above would u.
time to push the bearings back into the hubs and DISASTER STRIKES!!!!
time to invest in that press i been promising myself.
In the meantime, after lots of I got the fuel filler back in and put the beam back into position.
got there in the end...............nearly trial fit for handbrake cable which is a real pain to sort!!!!
disc fitted, pads in, caliper fixed in..........still no f*&^*(& handbrake though........but it looks better.
#12
I've found that life I needed.. It's HERE!!
Join Date: May 2004
Location: Cardiff
Posts: 1,224
Likes: 0
Received 0 Likes
on
0 Posts
Looking at those pics reminds me exactly what i been doing.
I did exactly the same thing refurbished or bought new and modified!!
Its wicked when its done then.
Its looking awesome.
I did exactly the same thing refurbished or bought new and modified!!
Its wicked when its done then.
Its looking awesome.
#13
Advanced PassionFord User
Join Date: Oct 2005
Location: in a dream world at present
Posts: 1,880
Likes: 0
Received 0 Likes
on
0 Posts
Looking mint mate ive been there doing all this when i had my white H reg xr2i, i came 2nd at ford fair with that in 2004 but sadly its dead now as a muppet killed it.
Can i just ask one question though...... are the front discs on the right way around????
Can i just ask one question though...... are the front discs on the right way around????
#15
Regular Contributor
Thread Starter
Join Date: Nov 2004
Location: Cleveland
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
hey up Beefy, how u doing? brakes.......................£800.00
Today is Thursday morning..........2:12am
should be almost ready by 14:00
time for bed, lots to do!
Today is Thursday morning..........2:12am
should be almost ready by 14:00
time for bed, lots to do!
Thread
Thread Starter
Forum
Replies
Last Post
jessie_rs
Ford RS Cosworth Parts for Sale
11
03-06-2019 04:57 PM
Zoggon
Ford Sierra/Sapphire/RS500 Cosworth
5
10-08-2015 10:39 AM