focus rs 2003
#1
Regular Contributor
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Im regrettably putting my focus rs up for sale. I have only owned this car for around 12 months and during this time its gone through quite a bit of a transformation.
The car has been fully painted a few thousand miles ago to a very high standard (il let the pics do the talking), i have also changed the interior to the later stitched front seats.
There are 2 keys 2 rs fobs but unfortunately no rs wallet. I have some receipts for the items i have bought but the previous owner didnt forward his receipts for the mods he carried out. However all mots are present. The car has currently covered 79k.
Engine
GT2871 dual bearing turbo
GT28 spec nortek manifold (heat wrapped)
HKS actuator
Full milltek stainless exhaust with decat
Uprated chargecooler pre rad
Uprated chargecooler pump from ATV (less than 1000 miles old)
K&N panel filter
Blitz spec r boost controller
New uprated clutch (before i bought the car)
Forge 007 recirc valve
Samco/Roose motorsport hoses (boost, ancillary, water, one way return valve etc)
Bluefin GT28 map
Bosch 044 fuel pump
Pro alloy swirl pot
Goodridge braided fuel lines for swirl pot setup
Chrome strut top covers
Chrome engine mount cover
Chrome bonnet stay
Chrome rail covers
Chrome dipstick
Chrome oil cap
Chrome cam belt cover
Chrome spark plug cover
Chrome cover (fire wall ???)
Chrome throttle body housing
Chrome header tank
Blue cam cover
Interior
New standard steering wheel (few hundred miles)
New pedals (less than 50 miles)
New gear knob
Ford racing boost gauge
Rear seat hinge covers
New parcel shelf
Exterior
Carbon front splitter
Carbon fog surrounds
Carbon bumper vents
Carbon door mirrors (standard ones also available)
Carbon mud flaps
Xenon lights (from st170)
US rear lights
LHD reverse light
Colour coded door handles
Suspension
H&R coilovers
H&R front and rear anti roll bar
Brakes
Hi Spec 6 pots with 360mm disks and red stuff pads
Wheels
Original alloys in very good un-refurbed condition with new caps
Yokohama Parada tyres all round
Bad bits
Small tear on both rear passenger footwells
Couple of stone chips have appeared already on the bonnet
As i have said above this is a reluctant sale as i was planning to run 660 injectors and omex 710 engine management (can be included in the sale for the right price), but my circumstances have changed. Mot until march 2013 and currently worn but can be taxed.
The car is estimated to produce 310-330bhp on 17psi (potential for more), always warmed up and cooled down, any inspection welcome.
Pics are a few months old but looks pretty much the same just with the silver wheels.
![](http://i1120.photobucket.com/albums/l481/dodge1983/photo-11_zps865c7759.jpg)
![](http://i1120.photobucket.com/albums/l481/dodge1983/photo-14_zpsf8a7b827.jpg)
![](http://i1120.photobucket.com/albums/l481/dodge1983/photo-16_zps21d6d4e0.jpg)
![](http://i1120.photobucket.com/albums/l481/dodge1983/photo-17_zps98bc14ff.jpg)
Im looking for £7900 ovno
The car has been fully painted a few thousand miles ago to a very high standard (il let the pics do the talking), i have also changed the interior to the later stitched front seats.
There are 2 keys 2 rs fobs but unfortunately no rs wallet. I have some receipts for the items i have bought but the previous owner didnt forward his receipts for the mods he carried out. However all mots are present. The car has currently covered 79k.
Engine
GT2871 dual bearing turbo
GT28 spec nortek manifold (heat wrapped)
HKS actuator
Full milltek stainless exhaust with decat
Uprated chargecooler pre rad
Uprated chargecooler pump from ATV (less than 1000 miles old)
K&N panel filter
Blitz spec r boost controller
New uprated clutch (before i bought the car)
Forge 007 recirc valve
Samco/Roose motorsport hoses (boost, ancillary, water, one way return valve etc)
Bluefin GT28 map
Bosch 044 fuel pump
Pro alloy swirl pot
Goodridge braided fuel lines for swirl pot setup
Chrome strut top covers
Chrome engine mount cover
Chrome bonnet stay
Chrome rail covers
Chrome dipstick
Chrome oil cap
Chrome cam belt cover
Chrome spark plug cover
Chrome cover (fire wall ???)
Chrome throttle body housing
Chrome header tank
Blue cam cover
Interior
New standard steering wheel (few hundred miles)
New pedals (less than 50 miles)
New gear knob
Ford racing boost gauge
Rear seat hinge covers
New parcel shelf
Exterior
Carbon front splitter
Carbon fog surrounds
Carbon bumper vents
Carbon door mirrors (standard ones also available)
Carbon mud flaps
Xenon lights (from st170)
US rear lights
LHD reverse light
Colour coded door handles
Suspension
H&R coilovers
H&R front and rear anti roll bar
Brakes
Hi Spec 6 pots with 360mm disks and red stuff pads
Wheels
Original alloys in very good un-refurbed condition with new caps
Yokohama Parada tyres all round
Bad bits
Small tear on both rear passenger footwells
Couple of stone chips have appeared already on the bonnet
As i have said above this is a reluctant sale as i was planning to run 660 injectors and omex 710 engine management (can be included in the sale for the right price), but my circumstances have changed. Mot until march 2013 and currently worn but can be taxed.
The car is estimated to produce 310-330bhp on 17psi (potential for more), always warmed up and cooled down, any inspection welcome.
Pics are a few months old but looks pretty much the same just with the silver wheels.
![](http://i1120.photobucket.com/albums/l481/dodge1983/photo-11_zps865c7759.jpg)
![](http://i1120.photobucket.com/albums/l481/dodge1983/photo-14_zpsf8a7b827.jpg)
![](http://i1120.photobucket.com/albums/l481/dodge1983/photo-16_zps21d6d4e0.jpg)
![](http://i1120.photobucket.com/albums/l481/dodge1983/photo-17_zps98bc14ff.jpg)
Im looking for £7900 ovno
Last edited by dodge8283; 25-10-2012 at 04:44 PM.
#6
PassionFord Post Whore!!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post