Very special Anglia- Poss for sale...
18-12-2009, 01:24 PM
#1
Very special Anglia- Poss for sale...
Due to a house purchase my anglia maybe for sale
I'm not desperate for the money, i do not need to sell to purchase house, its the wrong time to advertise but if someone gives me the asking price they can take it away
This is a rolling shell, it was bought as a very nice 1963 Anglia Super, it then was stripped and had in excess of £9,000 worth of fabrication, to take coswoth running gear.
This really is a work of art so i'll let the pictures, albeit poor quality do the talking..
More Specification, including parts with sale..
Custom made x-member,
Bilstein coilovers with new inserts, alloy hubs, new bearings, adjustable top mounts, adjustable TCA's, adjustable compression struts,
Floor mounted inward pedal box
alloyfloor, alloy gearbox tunnel, alloy rear spaceframe inserts,
chassis mounted engine mounts to take 200/205 block. Gearbox with bellhousing complete with Vibrotechnics mount.
LSD mounted to spaceframe on removable brackets, Coilovers mounted at 45degrees (does need diff springs tho).
Rear wishbones, hubs, new bearings,uprights, new cv joint. One new driveshaft and another in 2 halves, (to be made to length).
Alloy fuel tank with sender, swirl pot and foam filled.
Brand New Compomotive ml's and yokohama tyres
Shell...
Front completely restored with custom panels
Inner wings smoothed all holed filled (steel)
Bulkhead back to just under bonnet catch. built to cage and chassis x-member
Front wings have arches raised nearly up to swage line
Gearbox tunnel in lattice work, alloy underneath, has middle hoop to take gearbox mount
Double rear chassis x-member with cut out for prop
Diff mounts and rear suspension on spaceframe
Tubbed (will take 9" rims under original arches)
Fuel tank housing lowered
Cage goes to front turrets and triangulates to lower bulkhead tubing
front turrets all gussetted
Seat mount and harness eyelets all welded in place
Cage tied to door opening and stitched to windscreen pillars.
All rubbers new, what arent fitted are supplied
New heated front screen
All glass
Front bumper
Flocked alloy door cards and rear quarter cards
All dash trim and fittings (original)
Two skeleton seats (Sparco) to be covered. These have been shaped to fit the cage and tunnel
Shell painted in and out.
Also, here's a pic with an engine fitted ( NOT INC)
I'm not desperate for the money, i do not need to sell to purchase house, its the wrong time to advertise but if someone gives me the asking price they can take it away
This is a rolling shell, it was bought as a very nice 1963 Anglia Super, it then was stripped and had in excess of £9,000 worth of fabrication, to take coswoth running gear.
This really is a work of art so i'll let the pictures, albeit poor quality do the talking..
More Specification, including parts with sale..
Custom made x-member,
Bilstein coilovers with new inserts, alloy hubs, new bearings, adjustable top mounts, adjustable TCA's, adjustable compression struts,
Floor mounted inward pedal box
alloyfloor, alloy gearbox tunnel, alloy rear spaceframe inserts,
chassis mounted engine mounts to take 200/205 block. Gearbox with bellhousing complete with Vibrotechnics mount.
LSD mounted to spaceframe on removable brackets, Coilovers mounted at 45degrees (does need diff springs tho).
Rear wishbones, hubs, new bearings,uprights, new cv joint. One new driveshaft and another in 2 halves, (to be made to length).
Alloy fuel tank with sender, swirl pot and foam filled.
Brand New Compomotive ml's and yokohama tyres
Shell...
Front completely restored with custom panels
Inner wings smoothed all holed filled (steel)
Bulkhead back to just under bonnet catch. built to cage and chassis x-member
Front wings have arches raised nearly up to swage line
Gearbox tunnel in lattice work, alloy underneath, has middle hoop to take gearbox mount
Double rear chassis x-member with cut out for prop
Diff mounts and rear suspension on spaceframe
Tubbed (will take 9" rims under original arches)
Fuel tank housing lowered
Cage goes to front turrets and triangulates to lower bulkhead tubing
front turrets all gussetted
Seat mount and harness eyelets all welded in place
Cage tied to door opening and stitched to windscreen pillars.
All rubbers new, what arent fitted are supplied
New heated front screen
All glass
Front bumper
Flocked alloy door cards and rear quarter cards
All dash trim and fittings (original)
Two skeleton seats (Sparco) to be covered. These have been shaped to fit the cage and tunnel
Shell painted in and out.
Also, here's a pic with an engine fitted ( NOT INC)
Last edited by maxest; 21-01-2010 at 04:15 PM.
18-12-2009, 02:24 PM
#4
Max
what are you doing to me ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
I so so want this but seriously just do not have one inch of space left to home it
I was totaly blown away when i saw this car as the attention to detail is just awsome
Seiously cheap project for anyone
Good luck with the sale
Paul
what are you doing to me ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
I so so want this but seriously just do not have one inch of space left to home it
I was totaly blown away when i saw this car as the attention to detail is just awsome
Seiously cheap project for anyone
Good luck with the sale
Paul
Trending Topics
18-12-2009, 06:15 PM
#13
I've found that life I needed.. It's HERE!!
he didnt build it,a friend of mine built it to where it is now ,then sold it to max i believe,,, and its still the same as when he bought it,get your finger out max and at least finish it ,as Tony still regrets selling it after all the hard work
,, have you any pics?
19-12-2009, 06:41 PM
#23
PassionFord Regular
Join Date: Jul 2004
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
anglia
I recognise that!!. I built it, it was a lovely car. Doesnt look like youve touched it hardly at all Max. Good luck with the sale, i might even make you an offer after xmas Max. You wanna see what ive replaced it with 600bhp cossies eat yr heart out. Anyways if i dont buy it, whoever does look after it!!!!
19-12-2009, 10:23 PM
#25
Virgin
Join Date: Dec 2008
Location: Lichfield
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
nissan bonnet !?!
FOCUSTARD PIE . . where did u get the Nissan bonnet from !?! My uncle is Andy Middlehurst . . looks like a bonnet from one if their Touring car Primera's
Nice lookin Anglia 2
21-12-2009, 07:20 AM
#27
where did u get the Nissan bonnet from !?! My uncle is Andy Middlehurst . . looks like a bonnet from one if their Touring car Primera's
Nice lookin Anglia 2[/QUOTE]
I bought it on ebay a few years ago, I think it came of Keith odors car or Win percys !!
Nice lookin Anglia 2
[/QUOTE]I bought it on ebay a few years ago, I think it came of Keith odors car or Win percys !!
15-01-2010, 07:38 PM
#31
Virgin
Join Date: Dec 2009
Location: suffolk
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
i would just like to correct all post claiming that they built this car, in fact it was build by a good friend of my dads who is Ian tucker and most of the competition parts where supplied by my dad.
i would be glad to pass on Ian's or my dads number for any fabrication work or competition parts.
i would be glad to pass on Ian's or my dads number for any fabrication work or competition parts.
