Gearbox oil leak MT75 4wd
10-04-2015, 12:10 PM
PassionFord Post Whore!!
Thread Starter
Join Date: Aug 2007
Location: Tyne and Wear
Posts: 4,135
Gearbox oil leak MT75 4wd
Hello,
After putting a few miles on the car after the resto, I seam to have a little oil coming out of this hole.
Does anyone know what it's for? have I forgot to put a bolt in there or something?
10-04-2015, 06:23 PM
10K+ Poster!!
Join Date: Mar 2013
Location: Guildford
Posts: 10,841
Isn't that the leak hole to make sure Cosworths keep up a reputation for leaking oil?
Sorry I do not know
10-04-2015, 06:30 PM
PassionFord Post Whore!!
Join Date: Jul 2003
Location: Aberdeen
Posts: 8,258
Off the top of my head don't know, but I would start by asking Google for some MT75 photos and you'll probably get the answer of what goes in there.
10-04-2015, 06:34 PM
PassionFord Post Whore!!
Join Date: Jul 2003
Location: Aberdeen
Posts: 8,258
The following users liked this post:
10-04-2015, 09:08 PM
PassionFord Post Whore!!
Thread Starter
Join Date: Aug 2007
Location: Tyne and Wear
Posts: 4,135
Not really
I know where the drain plugs and the full holes are....the frekin transfer box output to front prop is weaping after a new seal as well
Swear I'm gonna burn this car before the year is out
10-04-2015, 09:11 PM
Live long and prosper!!
Join Date: Aug 2005
Location: area 51
Posts: 9,158
Keep the faith Mike. You will get there in the end.
I do this all day long and yes we have problems too.
Paul
11-04-2015, 12:58 AM
Resident Wrestling Legend
Join Date: May 2003
Location: Little India
Posts: 50,018
give me a day or so and i'll get my book out to see what's supposed to go there
i've also got that part of the box so i can see for myself, but the breather is a torx bolt with a hole in it at the top of the box somewhere
might be the breather for the transfer box though
The following users liked this post:
11-04-2015, 07:53 AM
PassionFord Post Whore!!
Thread Starter
Join Date: Aug 2007
Location: Tyne and Wear
Posts: 4,135
Quote:
Originally Posted by
dojj
give me a day or so and i'll get my book out to see what's supposed to go there
i've also got that part of the box so i can see for myself, but the breather is a torx bolt with a hole in it at the top of the box somewhere
might be the breather for the transfer box though
Ok Dojetron thanks
11-04-2015, 05:46 PM
Glennvestite
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,755
Is this any good Mike.
is your oil level correct. Im sure in the past i had too much oil in the transfer box and it pissed out of the front driveshaft seal.
11-04-2015, 05:51 PM
Glennvestite
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,755
11-04-2015, 05:52 PM
Glennvestite
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,755
11-04-2015, 07:15 PM
Resident Wrestling Legend
Join Date: May 2003
Location: Little India
Posts: 50,018
you've not got any pics of the transfer box mate, that's the main casing the pics refer to
11-04-2015, 07:58 PM
PassionFord Post Whore!!
Thread Starter
Join Date: Aug 2007
Location: Tyne and Wear
Posts: 4,135
Thanks Glenn, as Dojj said, the pics are of the main casing, the hole is in the transfer casing just behind.
I did have a weap out of the front prop, which has since cleared, so it's ok now or its got no oil left in it
Last edited by Cossy Mike; 11-04-2015 at 08:35 PM .
11-04-2015, 08:14 PM
Advanced PassionFord User
Join Date: Jan 2007
Location: jara
Posts: 2,294
one down one too go
The following users liked this post:
11-04-2015, 08:35 PM
Regular Contributor
Join Date: Dec 2012
Location: in the workshop
Posts: 342
its a hole that was only used for production, (milling and mounting in the mt75 rig) if it is leaking from there then the oil seal inside the box is knackered as that seals it
The following users liked this post:
11-04-2015, 08:36 PM
PassionFord Post Whore!!
Thread Starter
Join Date: Aug 2007
Location: Tyne and Wear
Posts: 4,135
Quote:
Originally Posted by
cozzy jeff
one down one too go
Aye tell me about it
Last edited by Cossy Mike; 11-04-2015 at 08:40 PM .
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TPM961
Restorations, Rebuilds & Projects.
19
15-01-2018 10:50 AM
talon1
Technical help Q & A
0
15-09-2015 10:27 AM
Flateric_2002
Technical help Q & A
0
15-09-2015 08:41 AM
BRAMMER
Ford Sierra/Sapphire/RS500 Cosworth
15
14-09-2015 08:52 PM
Adam Graham
Restorations, Rebuilds & Projects.
7
06-09-2015 06:04 AM