zetec115

As title. The car is supposed to be on standard suspension but it looks a little too low for that. Even if it was lowered, should it be rubbing over bumps?

From the sound I think its rubbing archliner more than the arch itself?

Would a brand new standard setup be the best cure or something a little stiffer

TurboShed

If it was standard height it'd look like a tractor

But where is it rubbing? As in front/back, when turning or going straight?

tabetha

Unless you have acar full and a caravan on the back it should not rub on standard ride height at all, as said.
I have coilovers set at std height - 1" as lot of sleeping policemen around here, but you do not need to go to these lengths, just get a new set of springs ie STANDARD RIDE HEIGHT chassis dynamics springs, 30% uprated, have used them myself very very good and comfy.
tabetha

zetec115

It's the fronts that rub going over bumps at speed. I'll get the wheels off and hopefully see what type of shocks and springs are in it. I know the back ones are black shocks with a red and white striped sticker on them. Further investigation needed

2wdsaph ben

mine is standard height but i have problem with my exhaust pipe scrapiong when i go over bumps.just take them real slow.

tabetha

My exhaust scrapes as well(scorpion) so taking box off.
tabetha

Twellsie

iTrader: (1)

my car is on standard suspension and never rubs (see siggy)

R5COS

had the same prop got new avo springs 25% stiffer, still didnt fix it so 2 new konis and put in two new top rubber mounts and hasnt rubbed since