jon_ross

iTrader: (1)

fiesta rs 1800 parts for sale and also other mk3 parts for sale. this car wasbought for the whole loom, ecu, and inlet manifold so these parts are not availible.

all parts are in good/working order unless stated otherwise. all parts are open to offer close to asking price and there will be additional postage charge ( some parts are pick up only)

parts list

black uncut parcel shelf with rubber straps £20
-40mm shocks and springs (not sure what make yet) with mounts £60
standard 1800 engine fully recon'd before sale with rs1800 cams £650
gearbox £40
black dash £25
black carpet £10
2 litre non pats mk1 mondeo auto ecu (EARS) £60
105ps SO efi inlet manifold £25
2x rs1800 throttle bodys £40 each
anti roll bar rear axle £40
headlights (4 sets) £10 each
brand new never fitted flowflex gearbox mounts £50
pair of fog lamps (one has a bit of the black sorround broken but is not noticeable when fitted) £15
gear selector £10
front anti roll bar £10
insrument panel (one has very stained white dails, more like yellow/brown) £15 each
front hubs £15 each
steering rack £20
window motors £15 each
door actuators £15 each
radiator £30
starter motor £25
alternator £40
mk3.5 rounded door mirrors £20 each
early square mirrors £10 each
blue magnecore ht leads £30
ignition coil £10
EDIS module £10
vehicle speed sensor (gearbox sensor) £20
glass £10 each
fuel pump £20
2x original ford headunits with codes £20 each
brake servo and master cylinder £10
front brake calipers £10 each
exhaust cat section £35
4 inch stainless back box £40

i do have more parts and will list once car has been striped further, thanks for looking, jon

zetaboostboy522bhp

price on drivers seat , but must be in excellent condition

cheers paul

jon_ross

iTrader: (1)

ive got a pair of rst recaros that are in as mew condition but will only sell as pair for 350 as they are the mintest seats youll fund (there even good enough for concours)

EscortMik3y

Hi mate would your gear box fit on the 130psi engine zetec block ? Also have you got the drive shafts and hubs etc

*Bri.4.b.Cos*

Hi, what reg / year is the car on?

CheeRS

Brian

jon_ross

iTrader: (1)

the car is a 92 on a k plate.

yeah the engine is the same as yours and yes ive got it all call it 80 for cash

ryley11

arite m8, how muuch for the 1800 badge on the back?

andy130

iTrader: (2)

you could make your own concours for 100, so 350 you'll be waiting along time pal

Slaney21

iTrader: (1)

Any pics at all chap

mk3 fezza

how much for the gearbox, shafts,hubs,starter,flywheel and clutch? provifing the clutch is in decent nick basically all the bits il need for running gear for the 2l conversion on the mk3 fezza to silvertop
cheers russ