PassionFord - Ford Focus, Escort & RS Forum Discussion
0 2015/04/03 07:42:36
Here it is zoomed in on Turbo boost instead of revs...the image on the camera is not sharp but in real life it is a crisp tft touch screen
Here it is zoomed in on Turbo boost instead of revs...the image on the camera is not sharp but in real life it is a crisp tft touch screen
0 2015/04/03 07:46:13
reservoir in boot, this will be trimmed professionally
reservoir in boot, this will be trimmed professionally
0 2015/04/08 05:36:57
pump under the car on anti vibration mounts
pump under the car on anti vibration mounts
0 2015/04/08 05:37:59
pipework to feed the pump under the car
pipework to feed the pump under the car
0 2015/04/08 05:38:53
Here you can see the crack under the bolt at the top of the bell housing....thoughts? I want to run the car to make sure everything else works but how long would this hold even with gentle use? 500ftlb is a lot of twist!
Here you can see the crack under the bolt at the top of the bell housing....thoughts? I want to run the car to make sure everything else works but how long would this hold even with gentle use? 500ftlb is a lot of twist!
0 2015/04/26 04:57:12
Atleast the diff cover looks good and should not break!
Atleast the diff cover looks good and should not break!
0 2015/04/26 04:58:51
I did a vry quick primer and repaint on the bay as was keen to get the engine back in, it can go to a body shop when the engine is rebuilt
I did a vry quick primer and repaint on the bay as was keen to get the engine back in, it can go to a body shop when the engine is rebuilt
0 2015/04/26 04:59:42
0 2015/04/26 05:00:55
0 2015/04/28 03:38:59
Rear box made as a replica of the original T16, it is upside down in the pic so the exit is actually on the passenger side of the car.
Rear box made as a replica of the original T16, it is upside down in the pic so the exit is actually on the passenger side of the car.
0 2015/05/05 03:31:46
Adam, these are MT motorsport 300mm rears using saph 4x4 std calipers (rebuilt)
Adam, these are MT motorsport 300mm rears using saph 4x4 std calipers (rebuilt)
0 2015/05/05 04:53:11
old vs new (std 4x4 cossie)
old vs new (std 4x4 cossie)
0 2015/05/05 04:54:58
Polished strut brace now clears all of the engine
Polished strut brace now clears all of the engine
0 2015/05/11 07:24:38
Here you can see the cleaned strut tops
Here you can see the cleaned strut tops
0 2015/05/11 07:25:37
I think this should go here too
I think this should go here too
0 2015/05/14 10:54:10
Rubbish iPad pic
Rubbish iPad pic
0 2015/05/29 09:55:53
Just took this from the 3ft front to back side of the tank, it gives you some idea of their size
Just took this from the 3ft front to back side of the tank, it gives you some idea of their size
0 2015/05/29 09:57:33
0 2015/06/22 12:27:16
A pic to show my hero sideways style
A pic to show my hero sideways style
0 2015/07/10 04:38:43
0 2015/07/12 11:38:27
0 2015/07/19 08:46:10
0 2015/07/19 08:46:18
0 2015/07/19 08:46:29
0 2015/08/03 12:33:00
Tilton with Mondeo adapter plate
Tilton with Mondeo adapter plate
0 2015/08/05 08:01:53
Mondeo adapter (to try) and tilton that arrived today from competition supplies
Mondeo adapter (to try) and tilton that arrived today from competition supplies
0 2015/08/05 08:03:47
Adapter on top of coleys
Adapter on top of coleys
0 2015/08/06 10:51:21
Tilton on
Tilton on
0 2015/08/06 10:51:30
The bronze bush my mate Coley made for me.
The bronze bush my mate Coley made for me.
0 2015/08/06 10:51:41
0 2015/08/06 10:51:47
Adapter plate on coleys mount
Adapter plate on coleys mount
0 2015/08/06 11:13:03
Brass bearing by my main man coley
Brass bearing by my main man coley
0 2015/08/06 11:15:14
Installed
Installed
0 2015/08/06 11:17:19
0 2015/08/06 11:19:15
It's the round bit on right, the front input cover is machined the. A mount made to give a flat base
It's the round bit on right, the front input cover is machined the. A mount made to give a flat base
0 2015/08/07 01:48:21
A bit like this and put the cable through it and through the bellhousing where the clutch cable goes now.
A bit like this and put the cable through it and through the bellhousing where the clutch cable goes now.
0 2015/08/10 10:59:21
All labelled up for ya
All labelled up for ya
0 2015/08/10 11:03:31
Look at my finger it is pointing at it on my iPad
Look at my finger it is pointing at it on my iPad
0 2015/08/10 11:30:29
Here is the schematic
Here is the schematic
0 2015/08/11 08:29:57