PassionFord - Ford Focus, Escort & RS Forum Discussion
Carbon Kevlar bootlid saves 25kg, Lexan marguard, my 205 panel will fit and lock etc all work as normal.
Carbon Kevlar bootlid saves 25kg, Lexan marguard, my 205 panel will fit and lock etc all work as normal.
0 2018/04/20 08:09:58
Whole bootlid held on 1 finger and outstretched arm
Whole bootlid held on 1 finger and outstretched arm
0 2018/04/20 08:10:07
Drivers door now with window and furniture fitted, these are silly light. I quite like it in white and keep thinking of having full white T16 with rally livery wrap but the car has always been known as Red.
Drivers door now with window and furniture fitted, these are silly light. I quite like it in white and keep thinking of having full white T16 with rally livery wrap but the car has always been known as Red.
0 2018/04/22 08:06:08
Again, you can pick these up with one hand very easily
Again, you can pick these up with one hand very easily
0 2018/04/22 08:06:26
0 2018/04/22 08:10:21
One part build
One part build
0 2018/04/23 11:25:54
Brand new, lots of good bits and run once
Brand new, lots of good bits and run once
0 2018/04/23 11:26:00
Wide track. 7 bhp engine
Wide track. 7 bhp engine
0 2018/04/23 11:26:04
Sold the front one, rear is brushless and lipo power, front one never seen any power
Sold the front one, rear is brushless and lipo power, front one never seen any power
0 2018/04/23 11:26:10
Marder on right, 27cc in middle and 32 cc on left, I have one nearer 10bhp but no pics
Marder on right, 27cc in middle and 32 cc on left, I have one nearer 10bhp but no pics
0 2018/04/23 11:26:16
This is fully ported 27cc, I have about 4 more.
This is fully ported 27cc, I have about 4 more.
0 2018/04/23 11:26:22
7075 hubs, hard anodised
7075 hubs, hard anodised
0 2018/04/24 03:58:51
Lightened CV joints WRC style, these will also have titanium bolts too.
Lightened CV joints WRC style, these will also have titanium bolts too.
0 2018/04/24 03:58:53
Hubs on the bench
Hubs on the bench
0 2018/04/24 03:58:54
New rear strut towers
New rear strut towers
0 2018/04/25 04:54:47
You can just see the tiny boxes from Before, these did not leave any room for adjustment and probably were moving as the shell didn’t have much strength there before and the old cage only bolted in where the back seats would have been
You can just see the tiny boxes from Before, these did not leave any room for adjustment and probably were moving as the shell didn’t have much strength there before and the old cage only bolted in where the back seats would have been
0 2018/04/25 04:54:55
5.7 kilos of weight saving across standard to normal flanges....that is a BIG saving in unsprung weight. Very happy
5.7 kilos of weight saving across standard to normal flanges....that is a BIG saving in unsprung weight. Very happy
0 2018/04/25 07:52:30
0 2018/04/25 07:52:31
0 2018/04/25 07:55:59
Should be around 8-10 kilos lighter than a normal rear beam plus no diff fitting kit.
Should be around 8-10 kilos lighter than a normal rear beam plus no diff fitting kit.
0 2018/04/25 07:56:00
Dummy supra diff in the T45 cradle, I have the supra billet diff cover to go on already
Dummy supra diff in the T45 cradle, I have the supra billet diff cover to go on already
0 2018/04/25 07:56:02
Clever little mod by Mark, (nice surprise today) easy to remove the diff using just two rear and two front bolts then unbolt the prop. We have been discussing a windowed diff cover.
Clever little mod by Mark, (nice surprise today) easy to remove the diff using just two rear and two front bolts then unbolt the prop. We have been discussing a windowed diff cover.
0 2018/04/25 07:56:03
0 2018/05/10 08:21:15
0 2018/05/11 06:57:21
They have travelled about 8 of those post and rails from where it went through.
They have travelled about 8 of those post and rails from where it went through.
0 2018/05/11 07:01:28
Nice set of billet pulleys arrived, I will post up the other ones Mark sent me (Thank You)
Nice set of billet pulleys arrived, I will post up the other ones Mark sent me (Thank You)
0 2018/05/18 07:03:26
Reminds me of this
Reminds me of this
0 2018/05/19 00:50:44
0 2018/05/19 00:50:46
0 2018/05/19 00:50:47
T45 WRC cradle to MK spec. Nice to see it in the car. I cannot wait to drive it.
T45 WRC cradle to MK spec. Nice to see it in the car. I cannot wait to drive it.
0 2018/05/19 03:23:57
First photo
First photo
0 2018/05/24 13:24:05
0 2018/05/24 13:28:22
0 2018/05/24 13:28:24
0 2018/05/24 13:28:26
Awesome car, here are the other pics
Awesome car, here are the other pics
0 2018/05/24 13:28:27
Boot floor is largely staying, will have a hump to allow exhaust to pass over cradle, Mark has chopped out the little coil over boxes and repaired the arch ready to chop out for the massive WRC turrets. You can see the pick up points where the cage will meet cradle mounts.
Boot floor is largely staying, will have a hump to allow exhaust to pass over cradle, Mark has chopped out the little coil over boxes and repaired the arch ready to chop out for the massive WRC turrets. You can see the pick up points where the cage will meet cradle mounts.
0 2018/05/26 02:11:31
T45 cradle taking shape, Mark has made a lot of Gucci mods to allow the diff to come out easily. Supra diff plug n play
T45 cradle taking shape, Mark has made a lot of Gucci mods to allow the diff to come out easily. Supra diff plug n play
0 2018/05/26 04:03:36
0 2018/05/26 04:03:44
I love the little lugs here to hold the diff
I love the little lugs here to hold the diff
0 2018/05/26 04:03:53
A bit of the cage has gone in to tie up the cradle mounts, the square bars are just bracing whilst the floor is out.
A bit of the cage has gone in to tie up the cradle mounts, the square bars are just bracing whilst the floor is out.
0 2018/05/29 09:51:44