PassionFord - Ford Focus, Escort & RS Forum Discussion
0 2018/01/31 11:33:12
0 2018/01/31 11:33:14
0 2018/01/31 11:33:16
0 2018/01/31 11:33:17
0 2018/01/31 11:33:19
0 2018/01/31 11:33:21
0 2018/01/31 11:33:28
0 2018/01/31 11:33:35
Can you see the yellow bit abov my finger, press that and then his select from my device
Can you see the yellow bit abov my finger, press that and then his select from my device
0 2018/02/01 10:20:17
My uprights for the rear hubs after they had been tumbled ready for colour. I think the Supra cover is for TimRS
My uprights for the rear hubs after they had been tumbled ready for colour. I think the Supra cover is for TimRS
0 2018/02/02 00:42:56
Lower rear steer arms
Lower rear steer arms
0 2018/02/02 00:42:58
Press the yellow icon and then browse your phone or computer.
Press the yellow icon and then browse your phone or computer.
0 2018/02/02 10:20:29
Low door bars for easier "ingress and egress"
Low door bars for easier "ingress and egress"
0 2018/02/03 08:46:06
Virtually zero dash, I like the bars down to the tunnel and would have a small kit car heater box in there. My car is / was fully trimmed but if I am going big cage I wonder if I might do something more like this?
Virtually zero dash, I like the bars down to the tunnel and would have a small kit car heater box in there. My car is / was fully trimmed but if I am going big cage I wonder if I might do something more like this?
0 2018/02/03 08:46:08
0 2018/02/03 08:48:40
0 2018/02/03 08:48:42
I think this interior looks good
I think this interior looks good
0 2018/02/03 10:12:00
After seeing how big and heavy the standard heater system / box was I opted for this kit car all in 1, it kicks out about 4.5 kw which is more than the standard car and is only 1.6 kilos and about 1/4 of the size which frees up a lot of space above the front of the tunnel. This will still take the cold air feed from the standard car inlet. I will have just the front panel poking out so will be neat and I can angle it to demise the front screen or I can add a pipe to the bulkhead of it.
After seeing how big and heavy the standard heater system / box was I opted for this kit car all in 1, it kicks out about 4.5 kw which is more than the standard car and is only 1.6 kilos and about 1/4 of the size which frees up a lot of space above the front of the tunnel. This will still take the cold air feed from the standard car inlet. I will have just the front panel poking out so will be neat and I can angle it to demise the front screen or I can add a pipe to the bulkhead of it.
0 2018/02/06 08:51:58
Oops
Oops
0 2018/02/06 11:43:35
Front of pulleys to back of block
Front of pulleys to back of block
0 2018/02/08 04:16:10
Dimpled part of sump to top of cam cover
Dimpled part of sump to top of cam cover
0 2018/02/08 04:16:17
Back of block to front of thermostat housing
Back of block to front of thermostat housing
0 2018/02/08 04:16:24
0 2018/02/09 09:48:30
0 2018/02/09 09:48:31
0 2018/02/09 09:48:33
Here is how it comes. The centre holds a battery but it can be hard wired
Here is how it comes. The centre holds a battery but it can be hard wired
0 2018/02/09 11:16:26
Here are mine. Done under 500 miles since £900 return
Here are mine. Done under 500 miles since £900 return
0 2018/02/09 11:59:56
0 2018/02/09 12:01:03
Part way through
Part way through
0 2018/02/11 09:37:11
Tunnel is coming out and new one going in
Tunnel is coming out and new one going in
0 2018/02/11 09:37:19
0 2018/02/11 09:37:24
Toys arrived so I can start to plan out the buttons and have ordered a modular fuse box to make the relays and loom work, the “race” button is actually the anti lag until I get the custom badge made up
Toys arrived so I can start to plan out the buttons and have ordered a modular fuse box to make the relays and loom work, the “race” button is actually the anti lag until I get the custom badge made up
0 2018/02/13 03:46:43
More holes than Swiss cheese
More holes than Swiss cheese
0 2018/02/16 10:38:12
Mark Ian going to make me a new fuel cell, this sump will poke through the bottom of the floor to fill the fuel pump(s)
Mark Ian going to make me a new fuel cell, this sump will poke through the bottom of the floor to fill the fuel pump(s)
0 2018/02/16 10:38:14
Not a lot left of the car now
Not a lot left of the car now
0 2018/02/16 10:38:20
0 2018/02/16 10:38:26
Years of modifications, sound offs and different choices of different owners have taken their toll so it will all be refreshed one way or another
Years of modifications, sound offs and different choices of different owners have taken their toll so it will all be refreshed one way or another
0 2018/02/16 10:38:33
Mark has fitted the oil pump which will allow the big wing sump to now go on.
Mark has fitted the oil pump which will allow the big wing sump to now go on.
0 2018/02/17 05:40:34
Billet main caps on arrow stroker crank
Billet main caps on arrow stroker crank
0 2018/02/17 05:40:36
0 2018/02/17 05:40:38