PassionFord - Ford Focus, Escort & RS Forum Discussion
0 2019/03/19 12:22:56
0 2019/03/19 12:22:45
I have bought a standard steering wheel, still not sure which one will be fitted on D day
I have bought a standard steering wheel, still not sure which one will be fitted on D day
0 2019/03/19 12:16:14
0 2019/03/19 12:16:03
0 2019/03/19 12:15:47
0 2019/03/19 12:15:32
0 2019/03/19 12:15:20
I’ve put these pics up again from the purchase day , because looking at this you’d never think it needs inner and outer sills, 2 front floors , inner and outer rear arches, back inner 1/4s , 2 CHASSIS LEGS!, and a front cross member
I’ve put these pics up again from the purchase day , because looking at this you’d never think it needs inner and outer sills, 2 front floors , inner and outer rear arches, back inner 1/4s , 2 CHASSIS LEGS!, and a front cross member
0 2019/03/19 12:15:11
0 2019/03/18 16:29:44
0 2019/03/18 16:29:36
Each panel was cured and blocked down and re primed just to be sure it’s perfect
Each panel was cured and blocked down and re primed just to be sure it’s perfect
0 2019/03/18 16:29:27
0 2019/03/18 16:29:18
0 2019/03/18 16:29:09
0 2019/03/18 16:29:00
0 2019/03/18 16:28:50
0 2019/03/18 16:28:40
0 2019/03/18 16:28:31
0 2019/03/18 16:28:24
0 2019/03/18 16:28:16
One new one second hand
One new one second hand
0 2019/03/18 16:28:09
0 2019/03/18 16:11:32
0 2019/03/18 16:11:26
0 2019/03/18 16:11:23
0 2019/03/18 16:11:20
0 2019/03/18 16:09:12
0 2019/03/18 16:08:32
0 2019/03/18 16:08:23
0 2019/03/18 16:08:14
0 2019/03/18 16:08:05
0 2019/03/18 16:07:57
0 2019/03/18 16:07:48
0 2019/03/18 16:07:38
Each panel was primed and cured for around about 8 weeks the blocked and reprimed a second time to ensure perfection
Each panel was primed and cured for around about 8 weeks the blocked and reprimed a second time to ensure perfection
0 2019/03/18 16:07:29
0 2019/03/18 15:48:40
0 2019/03/18 15:48:32
0 2019/03/18 15:48:24
The door you see in this image was scrapped , it was the original drivers door but it was rotting in the upper from the mirror corner across to the middle of the door .We cut out the section and welded in a metal strengthener that we made welded the repair piece in and repaired the door but after I primed it we just were not happy wit it it was swelly looking slightly bowed , so I set about looking for new doors
The door you see in this image was scrapped , it was the original drivers door but it was rotting in the upper from the mirror corner across to the middle of the door .We cut out the section and welded in a metal strengthener that we made welded the repair piece in and repaired the door but after I primed it we just were not happy wit it it was swelly looking slightly bowed , so I set about looking for new doors
0 2019/03/18 15:48:16
0 2019/03/18 15:48:07
0 2019/03/18 15:47:57
Just literally sanded the paint and undercoat off with a Festo and p180 disc , laborious but does a good job
Just literally sanded the paint and undercoat off with a Festo and p180 disc , laborious but does a good job
0 2019/03/18 15:47:47