PassionFord - Ford Focus, Escort & RS Forum Discussion
0 2019/03/19 14:33:02
0 2019/03/19 14:32:52
0 2019/03/19 14:32:43
0 2019/03/19 14:32:34
0 2019/03/19 14:32:24
0 2019/03/19 14:32:14
0 2019/03/19 14:32:04
0 2019/03/19 14:31:54
0 2019/03/19 14:31:45
0 2019/03/19 14:31:35
0 2019/03/19 14:31:26
0 2019/03/19 14:31:15
0 2019/03/19 14:31:05
0 2019/03/19 14:30:56
0 2019/03/19 14:30:46
0 2019/03/19 14:30:36
0 2019/03/19 14:30:26
0 2019/03/19 14:30:18
During this process I realised some of the panels had never been painted and none had ever been repaired part from a horrendous patch on the left 1/4 which had actually been blown in , the whole panel hadn’t been painted...
During this process I realised some of the panels had never been painted and none had ever been repaired part from a horrendous patch on the left 1/4 which had actually been blown in , the whole panel hadn’t been painted...
0 2019/03/19 14:30:09
Each time a panel was finished I infra red lamped it the coated it heavily in etch primer
Each time a panel was finished I infra red lamped it the coated it heavily in etch primer
0 2019/03/19 14:29:59
0 2019/03/19 14:29:50
0 2019/03/19 14:29:40
Started RHF wing If you look closely we have cut off the bottom of the wing, we decided to do this to allow us to fit entire sills which I’m sure you know are under the wings , we replaced the lower wing after the sill was welded on
Started RHF wing If you look closely we have cut off the bottom of the wing, we decided to do this to allow us to fit entire sills which I’m sure you know are under the wings , we replaced the lower wing after the sill was welded on
0 2019/03/19 14:29:31
0 2019/03/19 14:29:22
This is a picture of the car on day one of operation bare metal
This is a picture of the car on day one of operation bare metal
0 2019/03/19 14:29:12
0 2019/03/19 14:19:28
Made a nice job and didn’t upset the wing joins which still are factory
Made a nice job and didn’t upset the wing joins which still are factory
0 2019/03/19 14:19:18
Joined the section perfectly along the turn under the headlight then spot welded it all around the x member the way it was originally
Joined the section perfectly along the turn under the headlight then spot welded it all around the x member the way it was originally
0 2019/03/19 14:19:07
Bought a front panel and spliced it for the bits we needed repaired the front chassis leg ends fitted the x member then set in the front panel sections,
Bought a front panel and spliced it for the bits we needed repaired the front chassis leg ends fitted the x member then set in the front panel sections,
0 2019/03/19 14:18:59
Wanted to keep the front panel with original sealer as as wings and front panel have never been touched or even painted but had to change the x member
Wanted to keep the front panel with original sealer as as wings and front panel have never been touched or even painted but had to change the x member
0 2019/03/19 14:18:48
0 2019/03/19 14:08:40
While my mate Nev is fitting rear chassis legs I bare metaled the entire floor lol And I swear in not even a nerd
While my mate Nev is fitting rear chassis legs I bare metaled the entire floor lol And I swear in not even a nerd
0 2019/03/19 14:08:30
0 2019/03/19 14:08:22
0 2019/03/19 14:08:11
This job is so time consuming but satisfying too when you see the spotless section and then lash acid primer on and you know that’s it . Future proof
This job is so time consuming but satisfying too when you see the spotless section and then lash acid primer on and you know that’s it . Future proof
0 2019/03/19 14:08:02
0 2019/03/19 14:02:33
0 2019/03/19 14:02:23
0 2019/03/19 14:02:12
A lot of time involved in this but satisfying when it’s spoless
A lot of time involved in this but satisfying when it’s spoless
0 2019/03/19 14:02:04
0 2019/03/19 13:56:33