I have bought a T3 turbo to go on my RS1800, trouble is im no mechanic and have no idea where any of the pipes and things are to go . Also whats the little thing inside the down pipe connector . Can and one help or maybe get me a diagram, anything,
thanks guys

 

little thing in the down pipe connector?, it isnt a lambda sensor is it with wires coming from it?

 

no, its a circular paddle, it has an arm connected to it through the casing

 

thats the wastegate mate, the actuator rod then connectors onto the arm

 

cheers, can i run a standard actuator or do i NEED a -31.
Its a 1800 zetec engine and a T3 garrett

 

depends on how much boost ur gonna run, over 14psi is best with a -31 i think

 

cheers, any ideas on the pipe work???????????

 

its pretty simple really, air in (inlet), which on efi will go to an induction kit etc

there will be a oil feed on the top

oil outlet pipe on the bottom

water inlet on top(if watercooled), water outlet underneath

small pipe from the actuator to bleedvalve etc

small pipe from compressor housing to bleedvalve etc

big pipe from the compressor to the intercooler

hope this helps, needs a diagram really