Hi does anyone have a wiring diagram of a mk6 fiesta throttle pedal or the pin location of the wires

 

Google says "For a Ford Fiesta MK6, the throttle pedal sensor (also known as the accelerator pedal position sensor or APP sensor) typically uses three wires: a 5-volt reference, a ground, and a sensor signal wire. Pin locations can vary slightly, but the general wiring is a yellow/orange wire from pin 5 on the APP to C1-A2 on the PCM, and a blue/grey signal wire (twisted with a yellow/green ground wire) from pin 2 on the APP to pin 1 on connector C12".

 

Hi the plug has 6 wires 2 feeds 2 grounds and 2 signal wires.

 

Hmm, annoying I used to be able to get Ford wiring diagrams in my last job, don't work there anymore

 

Pin 1. 5v
Pin 2. 5v
Pin 3. signal
Pin 4. ground
Pin 5. ground
Pin 6. signal

 

Thanks for info