Original car loom

The Xr2i plug I have butchered

The crude joining

Can any1 tell me what goes where

Had a spare red/black and the only 2colourson wire was the green/brown
As the pics show what I have done the fuel pump is not priming like it should then kick in upon start, it’s on constantly for about 15/20 secs then goes off so I think I have a wire wrong somewhere any help people plz

 

Could it be that the pump does not prime all the time?

It seems right that it primes when cranking and so should start, so check fuel is reaching the engine and verify spark.

Martin

 

It used to prime and then stop and kick in when starting like normal , but I have put the 2i engine and ecu and loom and now rather than prime it’s just comes on and stays on for around 15/20 secs and then turns off but the engine starts and runs , just need to know by the pics what wires I need to move to have it working correctly