Hi
Has anyone got an idea of what voltage should be coming off of / going into pin 13 on the EEC V please?
I have a programming box to fiddle with my ECU but i am only getting 0.56v out of the aforementioned pin on my ECU.
I have tried a mondeo mk ii eecv ecu and a 1996 lincoln Mk Viii ECU both with the same results.
This ECU pin goes to pin 13 of the OBD connector.
Cheers
Kevin

 

The FEPS pin should normally be close to 0 volts, it's the programming device that supplies the +V to the ecu during programming.

 

Hi
Thank you for the advice, that puts my mind at rest that the ECU isnt faulty. I scoured google for hours looking for that info but couldn't find it.
Kind Regards
Kevin