Technical help Q & A Got A technical problem with you car? Keep it in here where the techies hang out and we will try to solve it for you!!

P100 2.9 V6 conversion

Old 17-04-2016, 07:31 PM
  #1  
Ian1964
Virgin
Thread Starter
 
Ian1964's Avatar
 
Join Date: Mar 2015
Location: Blyth Northumberland
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default P100 2.9 V6 conversion

Hi all,
I posted last year my P100 oil burner blew up, its fixed and ill run it for a bit.
I have bought a 2.9 V6 Granada auto complete and running great, I am going to swap the engine over to the P100.
engine swap first.
I have had a look on some posts and it looks straight forward
Question is which gearbox or hybrid box combi should I use, don't want to use the auto, is the p100 box no good to use?
I will upload some pics of the P100 and the Grandad before I start soon


Cheers Ian
Old 17-04-2016, 08:50 PM
  #2  
Ian1964
Virgin
Thread Starter
 
Ian1964's Avatar
 
Join Date: Mar 2015
Location: Blyth Northumberland
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

Just had another look around and I think an XR4i gearbox should work, will it all line up, input shaft, arms and release bearings etc?


Ian
Old 17-04-2016, 09:03 PM
  #3  
Ian1964
Virgin
Thread Starter
 
Ian1964's Avatar
 
Join Date: Mar 2015
Location: Blyth Northumberland
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

there is an XR4X4 5 speed box local to me would this work the same as a 2wd XR4i?


Ian
Old 17-04-2016, 09:24 PM
  #4  
Dod IRL
15000
 
Dod IRL's Avatar
 
Join Date: Mar 2016
Location: Co. Donegal, Eire
Posts: 42
Received 0 Likes on 0 Posts
Default

From my understanding, and it's limited, you need either a Type 9 with the Forrest bellhousing or the box off the 2.9 providing it's a 2wd. I'm not sure if the 4x4 uses a transfer box outside or internally but I don't think the 4wd one will work.
Old 17-04-2016, 09:27 PM
  #5  
Mark V8
PassionFord Post Whore!!
iTrader: (2)
 
Mark V8's Avatar
 
Join Date: May 2003
Location: Essex
Posts: 4,096
Received 166 Likes on 145 Posts
Default

2.8i XR4x4 gearbox will not be any good unless you're going 4WD

2.8i Capri or XR4i 3 door box would be the easiest option.

You could splice a 2.9 XR4x4 MT75 front with the rear of a 2 litre RWD Mt75 to make a hybrid if you get stuck.
Old 19-04-2016, 08:16 PM
  #6  
Ian1964
Virgin
Thread Starter
 
Ian1964's Avatar
 
Join Date: Mar 2015
Location: Blyth Northumberland
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

Cheers for the info.
The Grandad donor arrives this weekend hey hey!
had a thought today - I could always use the auto box


Ian

Last edited by Ian1964; 19-04-2016 at 08:17 PM.
Old 19-04-2016, 08:31 PM
  #7  
Caddyshack
10K+ Poster!!

 
Caddyshack's Avatar
 
Join Date: Mar 2013
Location: Guildford
Posts: 10,841
Received 1,031 Likes on 944 Posts
Default

Originally Posted by Ian1964
there is an XR4X4 5 speed box local to me would this work the same as a 2wd XR4i?


Ian
This is quite a big conversion if you are asking that question......not meaning to be rude.
Old 19-04-2016, 09:22 PM
  #8  
155lee
PassionFord Post Whore!!
iTrader: (10)
 
155lee's Avatar
 
Join Date: Dec 2006
Location: Uk
Posts: 4,103
Received 134 Likes on 117 Posts
Default

You also need a needle bearing for the 2.9 crank for the layshaft to run on,cars with autoboxes don't have them.
Cost Ł5 from Ford last time I bought 1.
Xr4i gearbox will be the easiest thing to slot in,I'd be more worried about wiring it up so it runs.
A 2.9 v6 cosworth engine would prob be easier to wire up,more power,nicer looking.
iirc the pre 1992 loom is the 1 you want.
Old 20-04-2016, 07:42 PM
  #9  
Ian1964
Virgin
Thread Starter
 
Ian1964's Avatar
 
Join Date: Mar 2015
Location: Blyth Northumberland
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

Caddyshack, no offence taken, it is a big job, I'll enjoy the challenge.
I'm 52 now and I would like to get the job done, modern technology gives me a chance to get the info I need before I strip down the donor car, I may sell the Grandad and buy a rotten sierra, all the info is out there and I am grateful to all on here.
I am not interested in a great handling pick up; just installing the big engine will do me fine for now.


Ian
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jdsjojo
Ford Sierra/Sapphire/RS500 Cosworth
40
10-04-2016 08:20 PM
FORD RS MAD
Modellers Corner.
5
01-04-2016 04:03 PM
cozzy jeff
Ford Sierra/Sapphire/RS500 Cosworth
5
31-03-2016 03:44 PM
Jakey46
General Car Related Discussion.
4
24-03-2016 05:26 PM
Sp3no
Ford Focus Diesel
0
21-03-2016 01:22 PM


Thread Tools
Search this Thread
Quick Reply: P100 2.9 V6 conversion



All times are GMT. The time now is 07:08 AM.