mk2 orion zetec conversion help needed
Thread Starter
Virgin
Joined: Jan 2013
Posts: 3
Likes: 0
From: norwich
mk2 orion zetec conversion help needed
Hi , ive got a mk2 orion that im fitting a 1.8 zetec into
mechanical side of things is easy , im stuck on wiring the begger up
ive got ford eec-iv jump ecu with integrated pats believed to be from a 96 escort , ive got transponder ring and key, full loom
Im after a pin out guide for the 60 pin connection
there is also a plug on the loom im a bit stuped by.... its got 4 black wires (guessing its pats related) but doesn't seem to have a home : /
Ive stripped the whole loom and traced a few
theres 12 wires from a plug which are believed to be 12v live,12v switched, earths, rev counter ?
if anyone can help, I would be most grateful and might actually be able to get on with this :
mechanical side of things is easy , im stuck on wiring the begger up
ive got ford eec-iv jump ecu with integrated pats believed to be from a 96 escort , ive got transponder ring and key, full loom
Im after a pin out guide for the 60 pin connection
there is also a plug on the loom im a bit stuped by.... its got 4 black wires (guessing its pats related) but doesn't seem to have a home : /
Ive stripped the whole loom and traced a few
theres 12 wires from a plug which are believed to be 12v live,12v switched, earths, rev counter ?
if anyone can help, I would be most grateful and might actually be able to get on with this :
Thread Starter
Virgin
Joined: Jan 2013
Posts: 3
Likes: 0
From: norwich
Thread
Thread Starter
Forum
Replies
Last Post
JoeyBoyden
Restorations, Rebuilds & Projects.
26
Jan 4, 2024 02:36 PM