Having a problem fitting this one from msd, can't fit it with the original ford oe bracket, the inpipe is too long and its mounted 5mm too high so unable to fit onto the fuel rail on my 2wd Sapph, the only way I can see to fit it is to make a custom bracket,
Anyone else had this problem?

 

Get something made up and zinc plate it .

I switched my regulator not long ago and found the bracket didnt fit, I just connected the pipe and let it sit in situ.

Not ideal I know but it worked for the short term.

 

I normally make a new bracket to fit them onto, they are as close as you will get to the OE fitting one these days.