Going to make my own engine management loom for the L8 with pectel super 8 board want it to run closed loop fuelling, wasted spark, air to air injectors with 12 position boost pot and knock sensor, looking at the motorsport developments wasted spark and one of there evolution chips, heres a diagram i've done but not shure on the wiring for the extra 4 injectors or the 12 position boost pot if anyone can see a potential problem or give any advice it will be much appreciated thanks.

 

You can't have closed loop or the 12 position boost pot on our software if your using the super L8

 

Thanks james for the info is there any chip that will run it all.