Brembo conversion
#1
I'm Finding My Feet Here Now
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Hi,
Surely this has been covered before, but i do have a question not regarding the conversion itself, but one other thing.
I intend to do the conversion, using Brembo FRS calipers, and ST170 hubs, but want them to run in my Speedline 2110 16x7 wheels without a problem.
I know that in Compomotives, it would run fine, but i haven't checked the clearance in mine and do not want to run FRS discs, want some 2 piece discs with max 310mm diameter.
What i need to know if anyone did this before, is the measures of the bell regarding the overall height and offset?
I know that Gaz_88 and a lot of others made a brake conversion on a Focus, but some of them run spacers and/or long studs, and i do not wish to do this...
Any help?
Surely this has been covered before, but i do have a question not regarding the conversion itself, but one other thing.
I intend to do the conversion, using Brembo FRS calipers, and ST170 hubs, but want them to run in my Speedline 2110 16x7 wheels without a problem.
I know that in Compomotives, it would run fine, but i haven't checked the clearance in mine and do not want to run FRS discs, want some 2 piece discs with max 310mm diameter.
What i need to know if anyone did this before, is the measures of the bell regarding the overall height and offset?
I know that Gaz_88 and a lot of others made a brake conversion on a Focus, but some of them run spacers and/or long studs, and i do not wish to do this...
Any help?
Thread
Thread Starter
Forum
Replies
Last Post
mk3ste
Restorations, Rebuilds & Projects.
19
17-10-2021 10:09 AM
Johnny Knoxville
General Car Related Discussion.
4
30-09-2015 07:21 AM
SMILER258
Restorations, Rebuilds & Projects.
36
28-09-2015 09:04 AM