Abs Conversion
Thread Starter
Virgin
Joined: Mar 2012
Posts: 5
Likes: 0
From: Pontypridd S.Wales
Abs Conversion
Hi, I'm changing to this ABS Conversion off a 2WD, but ive
got a 4x4 wiring harness, & its going on my XR4i. I'm not using the ECU or the ABS itself,
I'm now left with 2plugs on top of the reservoir, & 3 plugs on the unit itself,
Please can anyone tell me how do I wire this up?
1000 Thanx
Gaf
got a 4x4 wiring harness, & its going on my XR4i. I'm not using the ECU or the ABS itself,
I'm now left with 2plugs on top of the reservoir, & 3 plugs on the unit itself,
Please can anyone tell me how do I wire this up?
1000 Thanx
Gaf
Last edited by V6 POWER JUNKIE; Mar 20, 2012 at 07:17 AM.
Thread Starter
Virgin
Joined: Mar 2012
Posts: 5
Likes: 0
From: Pontypridd S.Wales
Little update, I've traced back & cut the abs sensors out now,
all the wires from the ecu ive trimmed back, there is some
Obvious live & earths I gotta join up & ive worked out the top
of the resevoir wires, so I'm only real stuck now on what do I
do with the power for the motor with the 2 pin plug, & the 2
Solonoids, 1 got 2wires, I got 5?
P.S. like I said I only want it for assistance only.
Thanx G
all the wires from the ecu ive trimmed back, there is some
Obvious live & earths I gotta join up & ive worked out the top
of the resevoir wires, so I'm only real stuck now on what do I
do with the power for the motor with the 2 pin plug, & the 2
Solonoids, 1 got 2wires, I got 5?
P.S. like I said I only want it for assistance only.
Thanx G
Thread
Thread Starter
Forum
Replies
Last Post
