video inside
Thread Starter
Too many posts.. I need a life!!
Joined: Dec 2010
Posts: 675
Likes: 1
From: garvagh n.i
2.0 injected pinto turbo project
please ignore the temporary boost pipe it was a hoover pipe
the main thing is the engine is spluttering and banging out of airflow intake
the engine came from the donor car and was working 100%
when i took it out i sent away for new gaskets etcc
the guy told me it was behind or ahead of the timing a few nicks cant really remember
so he left it dead on the timing 0 degrees
so i put everything into the road car exactly the same apart from the turbo
the engine is standard with standard management
please ignore the temporary boost pipe it was a hoover pipe
the main thing is the engine is spluttering and banging out of airflow intake
the engine came from the donor car and was working 100%
when i took it out i sent away for new gaskets etcc
the guy told me it was behind or ahead of the timing a few nicks cant really remember
so he left it dead on the timing 0 degrees
so i put everything into the road car exactly the same apart from the turbo
the engine is standard with standard management
Thread Starter
Too many posts.. I need a life!!
Joined: Dec 2010
Posts: 675
Likes: 1
From: garvagh n.i
and sorry for the poor quality
the engine will run like that if you get it up the revs and keep it up but only last for about 30 seconds
and if you let it drop to idle it will just die out
the engine will run like that if you get it up the revs and keep it up but only last for about 30 seconds
and if you let it drop to idle it will just die out
Thread
Thread Starter
Forum
Replies
Last Post
rsguy
General Car Related Discussion.
44
Sep 29, 2015 03:29 PM



