1.8 CVH vacuum spaghetti
#1
Tinkerer
Thread Starter
Join Date: Nov 2010
Location: Manchester
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
1.8 CVH vacuum spaghetti
Okay, so i'm a bloody fool for not marking their original locations, taking photographs, etc - but then i'm not convinced they were correct in the first place.
Does anyone here know of a website (here or elsewhere) that describes the plethora of vaccuum pipes, their purpose and their correct locations. For example, MAP sensors, purge solenoids, and the other untold pipes connected to the inlet manifold - I need some information on what they all do. These are all since my time, despite being a 20 year old car, this stuff is all new to me.
The Haynes manual doesn't give any information about these devices whatsoever, it simply tells how to remove and refit them.
Does anyone here know of a website (here or elsewhere) that describes the plethora of vaccuum pipes, their purpose and their correct locations. For example, MAP sensors, purge solenoids, and the other untold pipes connected to the inlet manifold - I need some information on what they all do. These are all since my time, despite being a 20 year old car, this stuff is all new to me.
The Haynes manual doesn't give any information about these devices whatsoever, it simply tells how to remove and refit them.
Thread
Thread Starter
Forum
Replies
Last Post
Mark RS
Ford RS Cosworth Parts for Sale
7
12-10-2015 06:01 AM
nicodinho
Ford Non RS / XR / ST parts for sale.
6
07-10-2015 12:56 PM