im in the process of a 1.8 zetec turbo conversion into my fiesta mk5 its all in mounted but i cant seem to figure out wot flywheel and starter to use its a dohc 16v mondeo engine with a endura diesel fiesta gearbox some1 shed some light please

 

i would use a zetec flywheel and sarter

maybe the clutch might be a differ input shaft for the endura box tho

 

thank u ill give it a try

 

you need a 1.6/1.8 mk3 fiesta/ mk5/6 escort zetec flywheel and clutch. clutch is same as escort rs turbo. this will bolt up to fiesta diesel box.
diesel or front mount zetec starter will do.

 

diesel starter no good gotta use a fiesta turbo flywheel an starter only combination that would work

 

or any efi xr2i/xr3i flywheel, they are all the same.

 

cvh flywheels have to have holes drilled out to 11mm. use a ZETEC escort5/6 or fiesta mk3 1.6/1.8 flywheel. bolts straight on. done it too many times. use fiesta diesel box, and any starter from mk1/2/3 fiesta, or mk3/4/5 escort.

 

sorry, correction with regards starter. you MAY need to use the mk5 fez diesel starter.

 

i think the starter and flywheel problem has been solved as the car is now nearly running

 

how do i upload pics i can upload a pic of the lash that is the wiring lol

 

i used photobucket mate, was a headfuck until i sussed it