chatter noise, why is it different on mine?
#1
I'm Finding My Feet Here Now
Thread Starter
Join Date: Mar 2009
Location: east sussex
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
chatter noise, why is it different on mine?
hi guys, the chatter off a ford engine sounds classic but on my c20let engine it doesn't sound the same...im running a t34 .63 and it doesnt make the high pitch DA na na na na lol if you get me??
is it to with air filter tube size/filter/no filter etc
is it to with air filter tube size/filter/no filter etc
#5
I'm Finding My Feet Here Now
Thread Starter
Join Date: Mar 2009
Location: east sussex
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
the turbo is at 11psi and its a .63 turbine 0.50 A/R t34...what you boys run?
i ran a green filter averagre size and now a bigger filter....it has2 90deg bends up and over the chassis leg then into a little straight....the pipe is 3".
i have the AFM there as well but considering moving this so i can run it with no filter etc or some kind of mesh over the tubo inlet.
pee vee - your vid doesn't work
i ran a green filter averagre size and now a bigger filter....it has2 90deg bends up and over the chassis leg then into a little straight....the pipe is 3".
i have the AFM there as well but considering moving this so i can run it with no filter etc or some kind of mesh over the tubo inlet.
pee vee - your vid doesn't work
Last edited by dearing5; 27-07-2010 at 06:29 PM.
Trending Topics
#9
10K+ Poster!!
iTrader: (21)
I would not put it the other side of the turbo I've never seen this
Compressor inlet side, it would possibly see from around -10kPa to 10kPa, compressor out it would see anything upto 250kPa (2.5bar) depending on what boost you're running. Also they are very sensitive things and MAF linearisation etc is not to be messed with!
Compressor inlet side, it would possibly see from around -10kPa to 10kPa, compressor out it would see anything upto 250kPa (2.5bar) depending on what boost you're running. Also they are very sensitive things and MAF linearisation etc is not to be messed with!
#10
I'm Finding My Feet Here Now
Thread Starter
Join Date: Mar 2009
Location: east sussex
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
this is what i thought! a guy on another forum put his on the pressure side...and he said its faultless but i disagree. the wires are very thin that read the air so yeah surely 25psi would wreck it?
i'll try taking the filter off or more boost haha.
mine sounds the same as this
http://www.youtube.com/watch?v=cPZZvd55hxg
and this is what i want??
http://www.youtube.com/watch?v=6J-mS...eature=related
i'll try taking the filter off or more boost haha.
mine sounds the same as this
http://www.youtube.com/watch?v=cPZZvd55hxg
and this is what i want??
http://www.youtube.com/watch?v=6J-mS...eature=related
Last edited by dearing5; 28-07-2010 at 05:26 PM.
#14
Virgin-popper
iTrader: (1)
Join Date: Oct 2007
Location: Norway
Posts: 1,198
Likes: 0
Received 0 Likes
on
0 Posts
http://www.youtube.com/watch?v=zRPE3tDhlO4
http://www.youtube.com/watch?v=dIRUYvHBGLY
http://www.youtube.com/watch?v=LNawymsX3xA
http://www.youtube.com/watch?v=ULJJhDwhy2k
Gr.a cosworth, 2.0bar+ with 34mm restrictor on a turbonetics turbo
http://www.youtube.com/watch?v=dIRUYvHBGLY
http://www.youtube.com/watch?v=LNawymsX3xA
http://www.youtube.com/watch?v=ULJJhDwhy2k
Gr.a cosworth, 2.0bar+ with 34mm restrictor on a turbonetics turbo
Thread
Thread Starter
Forum
Replies
Last Post