Break disk replacement.
#1
Virgin
Thread Starter
Join Date: Jul 2010
Location: Birkenhead UK
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Break disk replacement.
Hey guys, im new to the forum and im sorry to jump in straight away with a dumb question.
I need to replace the disks on my Focus MK1 1.8 Zetec, I have had a quick Google but I am unable to find anything remotely useful.
Ive had the card up on Axle stands and had a look but im unsure of how to remove the disks, from what I can tell is I should remove the calliper and then tap the disk loose. Is this correct and if not do I need to remove the locking nut on the end of the drive shaft to allow the disk to come loose?
Thanks in advance
I need to replace the disks on my Focus MK1 1.8 Zetec, I have had a quick Google but I am unable to find anything remotely useful.
Ive had the card up on Axle stands and had a look but im unsure of how to remove the disks, from what I can tell is I should remove the calliper and then tap the disk loose. Is this correct and if not do I need to remove the locking nut on the end of the drive shaft to allow the disk to come loose?
Thanks in advance
#2
YES I KNOW I CANT SPELL
Join Date: Mar 2008
Location: chingford e4
Posts: 5,271
Likes: 0
Received 0 Likes
on
0 Posts
you got it in one mate. remove the 2 bolts holding the caliper on and the disks will tap off.dont undo the drive shaft nuts tho. i would recamend changing the pads as well as the disks
#3
Virgin
Thread Starter
Join Date: Jul 2010
Location: Birkenhead UK
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
I will see how the current pads cope as they are pretty new and have only covered around 1500 miles, ill give em a try and if no good ill chuck em.
Thanks again
Thread
Thread Starter
Forum
Replies
Last Post
chowfornow
Ford Non RS / XR / ST parts for sale.
14
05-01-2019 09:01 PM
nicodinho
Ford Non RS / XR / ST parts for sale.
6
07-10-2015 12:56 PM