hey guys

just bought a s2 with rough body so while its off the road for as long as it takes i have bought a 1.3 mk4 estate

i want to do the turbo conversion to the estate but am stuck at the wiring ? what needs removed from the rs to make the other run ? i can do the wiring not a prob but just some pointers would be great

both dash boards and interior are removed

surly its not as simple as removing the loom from the rs and firing it in the estate is it ???????



thanks



tommy

 

yes thats is how simple it is however some people cut the loom were the driveres door is. but thats not too hard to re join them 16 wires i think

 

WOW

just started taking out the loom ......... were do i stop lol

i undone it all to the fuse box then lifted up the fuse box and wow a big mess of wires


HOW MUCH OF THE MESS DO I NEED LOL



TOMMY

 

I would swap over the whole wiring loom mate

 

may as well do it right the first time just unplug what can then fit it into yours

 

You need the full loom mate the only bits i chopped on my estate and re-soldered was the wires for the roof clock as i thought it would be a right pain to feed them back through.
I did away with the electric windows,electric mirrors and central locking as i didnt need these but these bits are easy and just unplug from the main loom.

mark.

 

LOL WTF THATS LOOOOOOOOOOOOOOOODS OF WIRES




Just chose the easy option bought megasquirt off my mate with wideband and egt probe
and a full size loom

i done this to my zetec turbo and was prety straight forward so this seams alot easier



YEEEHA let the fun begin

THANKS FOR THE HELP GUYS

 

you do only need the engine loom, fuel pump relay and fuel pump wires, easy but time consuming, guides can be found on this site
http://www.retrofiesta.co.uk/