HELP!!! xr3i efi running rough
#1
15000
Thread Starter
Join Date: Jan 2006
Location: Perth Wa
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Hi there i have a 90 xr3i efi which is hard to start and struggles to idle.
All vaccum pipes checked with no leaks apparent. apart from the pipe that goes from the air intake halfway over the cam cover where does it go?
any ideas would be great.
Tony.,.,
All vaccum pipes checked with no leaks apparent. apart from the pipe that goes from the air intake halfway over the cam cover where does it go?
any ideas would be great.
Tony.,.,
#2
20K+ Super Poster.
![Default](https://passionford.com/forum/images/icons/icon1.gif)
If you mean the main feed pipe to the throttle body is leaking this will defo cause issues, and is very common problem, as is the fuel enrichement relay located in the kickpanel, a lot disconnect this as it richens the mix way too much, causing bad starting on some.
tabetha
tabetha
Thread
Thread Starter
Forum
Replies
Last Post