Hi every1 im new 2 the site and owning a descent Ford and need sum help. Iv got a 2.0 litre XR4x4 and was wondering if the quick shift kit from a 4x4 cossie will fit it, and also does any1 know of any upgrades 4 the engine (cams, 4 branch etc).

 

if ur motor is the 2.0 dohc ,theres not too much in the tuning department,yes you can get a k&n filter /induction kit,and a 4 branch ,decat the exaust,a nice freeflow s/steel zorst and u will feel a big diference, im sure the quick shift will fit,same box.

 

similar box but certainly not the same

 

thought running gear was the same? as i have cossie hi spec brakes on my xr,and when ordred my bilsteins from burtons they too are cossie items ,and all fit no probs?

 

running gear is the same only u have 260mm brakes instead of 280mm. differant bellhousing and bushes on rear beam.

 

Thanx 4 replying guys, very much appreciated. Does any1 know of, or reccomend any1 in particular 2 get a 4 branch 4 it?

 

u have a 26mm anti roll bar opposed to the 28mm cossy one.
go ashely id imagine theyd have one. or juvt get a custom zaust builder to do one.
£/hp u be best finding a 24v cosworth engine and an xr4 bellhousing.

 

told you they would help ya out ste