There is a nipple on the side od the turbo housing that i dont know where i have to conect it to.

Also the nipple on the acctuator, can anyone help.

 

They are connected to each other, through a boost control valve normally.
tabetha

 

great thank, there are 2 nipples on the amal; valve where do they go?

 

If you look REALLY carefully you will see they have a letter or a number by each pipe.
1 = Actuator, could also be A
2 = Compressor Housing could also be H, this is the nipple you refered to earlier.
It doesn't matter too much either though as it is only a straight open shut valve.
tabetha