on a 2wd saff cos when bleeding the front 4pots does the ignition need to be on so that abs pump is running or do you bleed them with ign off???

cheers,
Phil

 

Ignition does indeed need to be in position 1 so abs valves are open, I just disconnect the actual motor wire, then pressure bleed with me gunsons eezibleed.
tabetha

 

not on the fronts mate, just as normal

just make sure that you do both nipples one at a time inner and outer and then once again, just to make sure

 

I just assumed it did, I always do all mine at same time when change fluid every 6 months, but did think afterwards it was one end only needed, but wasn't sure at all.
tabetha

 

the front's are as normal, the pump just provides "assistance" in the same way a servo would

the rears are presurised by the pump not your foot ont e pedal, so that's why they are a pain in the arse and require fiddling with

 

sweet cheers for that. another job to do this weekend.

Thanks,
Phil