Decent Co" and HCs readings for Cossie @ MOT
#1
![Default](https://passionford.com/forum/images/icons/icon1.gif)
My cossie running closed loop MSD chip has just been MOTd, emissions passed, HCs were 152 and CO2s were just .4%- thats mega low CO2 as the limit is 3.5%!!!
Iwas wondering what HCs were ideal on this setup as 200 was the limit and I think the phase is out so over fulelling, anybody had their setup MOTd please
could you post your results below??
Iwas wondering what HCs were ideal on this setup as 200 was the limit and I think the phase is out so over fulelling, anybody had their setup MOTd please
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
#3
20K+ Super Poster.
![Default](https://passionford.com/forum/images/icons/icon1.gif)
If it were overfuelling HC would be vastly over what it is.
My results are NOT closed loop, but CO is 1.67, HC 131 at 85C, at 75C they were 3.52 and 207, at 60C they were 4.47 and 271, but this is on greys with 160,000 miles on the bottom end.
It would be interesting to see how others compared, I have closed loop on 1 of the positions but forgot to put it on for test, but will do so next time to see the difference.
tabetha
My results are NOT closed loop, but CO is 1.67, HC 131 at 85C, at 75C they were 3.52 and 207, at 60C they were 4.47 and 271, but this is on greys with 160,000 miles on the bottom end.
It would be interesting to see how others compared, I have closed loop on 1 of the positions but forgot to put it on for test, but will do so next time to see the difference.
tabetha
Thread
Thread Starter
Forum
Replies
Last Post
dojj
General Car Related Discussion.
28
11-09-2015 10:00 PM