rst-g

Lil prob with my pectel injectors not wrkin!
I have 12v at the plug on the loom to the injctors,I have no trigger.is the trigger controled by the cam sensor? We have .5v at the loom connection to the can sensor once connected to cam sensor voltage drops to zero is this right if not could if be a faulty cam sensor shorting out feed? I can get the injectors to wrk manually with a injector probe!!

pa_sjo

No, it won't be the cam sensor..

rst-g

what do you think it could be????

pa_sjo

I assume you're making your own loom up for this?....

rst-g

no it was a flyin loom and had it shortend and just can't get the injectors to fire

rst-g

anyone know what would cause this?

rst-g

anyone?

pa_sjo

What does it say in DESC when you crank the car? One of the major benefits of running something like T2 is the wealth of diagnosis information it gives you in DESC!

rst-g

what is Desc? What could cause the injectors not to pulse even tho the is a feed there and the injector will pulse with a probe but not the pectel?????????

pa_sjo

DESC is the Pectel mapping software....

rst-g

[QUOTE=pa_sjo;3687102]DESC is the Pectel mapping software....[/QUOTE
I dont have anythink like that is the any other way to find out?