Hello Everybody
What Size Exhaust Housing And Wheels Will Be Good For This Specced Engine
7.23 Compression
Greys
Bd14 Inlet Cam
Modified Plenum
27mm Intake Ports And 25 Mm Exhausts
The Car Is Used For 1/4 Mile Not For Circuits
Thanks

 

Turbo is far too large for your spec... get a T4 or GT30..

 

i hope its 8 greys lol

 

what t4 size is used as i was offered a roller bearing one
from a friend of mine

 

Standard RS500 turbo spec would be fine.

 

anybody can tell me specs of a rs 500 t4
Thanks

 

It's a bit of a strange one. You're not going to find one by trawling ebay in america or anything.. best to contact one of the reputable UK turbo people, like CR turbos.

 

Ehh, another T4 lover

A gt 35 is super for drag strip, i use one on mine, and wont go any other way.
Can recomend no other then a .82 housing, as the way it comes on boost and the power it can produce, then it will be very good for the strip

 

all i use the car for is for the drag strip as i dont bother if it boosts over 4500 all i am interested is top end here in malta i have seen a couple cossies running 7.3 secs
on escorts mk1 all of them have turbos the size of a gearbox bell housing so i think a gt 35 will be good for my application as that were the opinions here as well

 

4 greys on a gt35 as above you need 8 of em haha