hi mates i've start projekting a fiesta mk4 with a 1.8 mondeo lump but i'm stuck because of the engine mounts. can you put some pics of that engine on teh fiesta do see what engine mouts i should use

 

did you find out what mounts you need just ave got a problem with it to well im looking in to it mowbray2k3@hotmail.com cheers

 

i didn't find i think in the mk3 rs 1800 but i need to cut the a few things :P

 

im with you on that one

 

but i need som pics of all mounts and i only find this

 

stuck on this one got loads of pic will sort it wen i get my engine

 

post replys igf yous find out

 

rite as anyone fitted a after market steering wheel to a fiesta mk4 just ave removed one and the air bag module the air bag lights on how do i get it off and also will it pass its mot if i have removed an airbag

 

if your car only has driver air bag you should be able to remove the system totally or just diconnect and remove bulb for light i think.
just change for non pretension setbelts or it could be a bit dangerous if they go off with no warning!

 

but will it pass mot and what do ya mean about the belts

 

i found bit info it seems ya need to modify mk3 mounts to fit zetec then need some vibra technics mounts just to fit mk4 fiesta im

 

 

lol

 

i've done i've got an isotta. you have two little screws in the back of the steering wheel to remove the airbag center. then youremove de airbag and diskonect the yellow. one more screw in the center of the wheel and pull it off. but the light of the airbag will appear. so remove the light :P