the car runs fine then when its starting to boost it misfires the plugs,leads,coil,distributor cab and arm have been changed and still the same any ideas??cheers

 

mine dones this turned out to be the phase sensor make sure all the wires are ok on it the insulation has not cracked etc

 

Does it do it when the engine is warm or is it all the time.

 

cheers.guys

its.my.car

Does.it.all.the.time.warm.or.cold

Soon.as.it.starts.to.spool.up.circa.3000.revs.it.s till.accelerates.but.very.slowly

Other.thing.is.the.rev.counter.is.all.over.the.joi nt.especially.when.coming.on.to.boost............. ..jumps.right.of.the.scale

Only.time.it.sits.normal.is.when.coasting.really

Not.being.very.mechanical.i.dont.have.a.clue

Someone.has.suggested.it.maybe.the.amal.valve?

Thanks.in.advance.for.any.help.and.sorry.about.my. broken.space.bar

cheers

 

this is the exact problem mine had chap!check your phase sensor wiring,also if not got one fit a grp A coil

 

ill.change.it.tomorrow.then.mate.got.a.3.dr.escort .cossoe.i.can.get.bits.off

hopefully.that.will.be.me.and.ill.owe.you.a.beer

 

 

anyone.know.how.easy.it.is.to.change.the.phase.sen sor?

like.a.very.basic.description.lol

 

was the wiring crap then???

 

phase senor replacement ere


https://passionford.com/forum/viewtopic.php?t=303515

 

not.had.a.chance.to.check.it.yet.fella

bad.scottish.weather.you.know.the.rep.lol

hoping.its.an.easy.one.to.do

 

What is the plug gap set to??

 

stage 3,

please stop with the '.' everywhere. a space works fine too you know.

 

its.broken

 

not.sure.how.to.tell.mate.....?

turned.out.to.be.the.amplifier.that.needed.changed

not.sure.what.this.does.but.its.located.on.the.NS. wing

Took.2.secs.to.change.as.well

Mechanice28.thanks.for.all.your.help.mate......tur ns.out.there.had.been.a.new.phase.sensor.fitted.by .the.looks.of.things.so.thankfully.a.new.amplifier .cured.the.problem

 

 

no probs chap glad it sorted

 

0.2 too 0.3 mm

 

Huh?? .008 to .011 of an inch??

Seems a little small for a plug gap...

 

had the same problem wuth mine also cleaned the connectors to the amal valve no problem

 

do u means spark plug gap???thought u ment phase sensor gap??