programming new keys 95 escort cos
#1
15000
Thread Starter
Join Date: Jul 2007
Location: Crawley
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
programming new keys 95 escort cos
Got a new lock set changed the ignitiion barrel now how do i programme my new keys so i can start the bastard ...................any help appreciated or is this a main dealer job
Rashers
Rashers
#4
ON THE ROAD AGAIN
Join Date: Apr 2005
Location: EDINBURGH
Posts: 723
Likes: 0
Received 0 Likes
on
0 Posts
turn ign switch to 1 four times within 8 seconds
clock led iluminates for 5 seconds
remove master key while iluminated
insert key to be programmed
turn to position 1
led goes out for 2 secs then iluminates again
repeat within 30 seconds to any other keys to be programmed
to exit programming mode turn to position 2 and wait for 30 seconds
if this dosent work it says there is another way to try too let me know
tommy
clock led iluminates for 5 seconds
remove master key while iluminated
insert key to be programmed
turn to position 1
led goes out for 2 secs then iluminates again
repeat within 30 seconds to any other keys to be programmed
to exit programming mode turn to position 2 and wait for 30 seconds
if this dosent work it says there is another way to try too let me know
tommy
#5
20K+ Super Poster.
The above should work, just hold the master key, next to the cowling, or better still take cowling off, as if I understand it you will not be able to insert it and turn as wrong key now with lock change.
Red masters can be reset at dealers if this does not work, I had one red key supplied and programmed, + two black keys, all in about £60 from memory.
tabetha
Red masters can be reset at dealers if this does not work, I had one red key supplied and programmed, + two black keys, all in about £60 from memory.
tabetha
Thread
Thread Starter
Forum
Replies
Last Post