Hi all.
On my erst i am experiencing problems engaging gears now and again.
Some times they just slip in and other times its quite difficult to select. As far as i am aware the clucth seems ok, so is the gearbox on its way out or could this just be a case of fitting new mounts?

Paul

 

I HAD THE SAME PROBLEM WITH MY FRST, TURNED OUT IT WAS THE SPRING ON THE CLUTCH PLATE. WHILE I HAD THE GEARBOX OUT I ALSO PUT A NEW CLUTCH IN

 

i would get the gear selecter checked for alignment or excess wear before taking out the box

 

gear linkage is always a fav nats cock out of aline can screw it all up

 

I'd try to adjust the gearlinkage first

 

is there an easy way to adjust the linkage or is it just trial & error