what does a standard chip look like
25-07-2004, 01:38 PM
#1
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: Jun 2003
Location: NWFP
Posts: 1,288
Likes: 0
Received 0 Likes
on
0 Posts
what does a standard chip look like
i guess they're getting rare now , but i'd like to know what the sticker on a STANDARD i.e. 204bhpish cossie eprom looks like. is it printed/ handwritten/ no label?
pics would be nice...
please??
pics would be nice...
please??
25-07-2004, 09:47 PM
#2
PassionFord Post Whore!!
Join Date: May 2003
Location: Wiltshire UK
Posts: 3,795
Likes: 0
Received 0 Likes
on
0 Posts
sorry, don't know for certain about 2wd.. but for 4x4:
The label is handwritten with reference "L3e.31"
The outer label on the ECU also carries the same reference, so maybe 2wd is similar, with the external label reference matching the eprom label??
The label is handwritten with reference "L3e.31"
The outer label on the ECU also carries the same reference, so maybe 2wd is similar, with the external label reference matching the eprom label??
26-07-2004, 04:01 PM
#4
PassionFord Post Whore!!
Join Date: May 2003
Location: Wiltshire UK
Posts: 3,795
Likes: 0
Received 0 Likes
on
0 Posts
Dave, that's a bog standard L8 ECU, baby board is fitted as standard to L8, the Pectel version is visibly similar, but obviously different electrically.
This particular ECU still had the Marelli seals intact before we took the lid off
This particular ECU still had the Marelli seals intact before we took the lid off
Trending Topics
27-07-2004, 08:15 AM
#8
PassionFord Post Whore!!
Join Date: Sep 2003
Location: Macclesfield - you'll never leave....!
Posts: 4,519
Likes: 0
Received 1 Like
on
1 Post
orrrr, unless mine wasnt a L8 and had been swapped at some time befor ei had it - but the seals were intact on min ebefore i had the ab stg 1 chip fitted. bizzare
28-07-2004, 07:27 AM
#10
PassionFord Post Whore!!
Join Date: Sep 2003
Location: Macclesfield - you'll never leave....!
Posts: 4,519
Likes: 0
Received 1 Like
on
1 Post
dont know, i sold it a couple of years back,, my escos is p8, but its phase 0 chip that was in it was not on a daughter board though.
30-07-2004, 01:41 PM
#13
PassionFord Post Whore!!
Join Date: May 2003
Location: Wiltshire UK
Posts: 3,795
Likes: 0
Received 0 Likes
on
0 Posts
07-10-2004, 10:54 PM
#15
Regular Contributor
Join Date: Sep 2004
Location: nottingham
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
it could say anything realy ,as it is not a special part, 
only the data in the chip is special, but when i program a chip for a cossie i normally use ......27g4a-15 chips ,the only real way of checking is to put your chip in a eprom pragrammer and veiw the data on it
only the data in the chip is special, but when i program a chip for a cossie i normally use ......27g4a-15 chips ,the only real way of checking is to put your chip in a eprom pragrammer and veiw the data on it
Thread
Thread Starter
Forum
Replies
Last Post
wheelwizardrefurbs
Technical help Q & A
24
24-09-2015 08:35 PM
timsrs
Ford Sierra/Sapphire/RS500 Cosworth
22
24-09-2015 08:14 PM