toad ai606 alarm
#1
Too many posts.. I need a life!!
Thread Starter
Join Date: Aug 2006
Location: conwy
Posts: 541
Likes: 0
Received 0 Likes
on
0 Posts
toad ai606 alarm
i was messing about with the key fob yesterday and ive silenced the alarm when it goes off no noise, just indicators flashing,any ideas anyone
#5
Too many posts.. I need a life!!
Thread Starter
Join Date: Aug 2006
Location: conwy
Posts: 541
Likes: 0
Received 0 Likes
on
0 Posts
toad
ive had it a couple of months i was in programming mode trying to silence it on arm disarm and some how silenced the whole thing
Trending Topics
#13
Too many posts.. I need a life!!
Thread Starter
Join Date: Aug 2006
Location: conwy
Posts: 541
Likes: 0
Received 0 Likes
on
0 Posts
#17
20K+ Super Poster.
You cannot silence the main alarm function from the key fob as this deletes the point of the alarm(thatcham???), BUT my dad had this some 2 months or so ago on his 4i, and it turned out to be a very small amount of corrosion on the battery terminal between the round post and the clamp and no I could not beleive it either.
It worked perfect, armed,disarmed, triggered etc but no sound, battery ok car starting perfect, need a hefty starter and battery for 4 litre anyway but no sound, thought it worth a go so cleaned up terminal and perfection right away.
tabetha
ps ai606 as well
It worked perfect, armed,disarmed, triggered etc but no sound, battery ok car starting perfect, need a hefty starter and battery for 4 litre anyway but no sound, thought it worth a go so cleaned up terminal and perfection right away.
tabetha
ps ai606 as well
#18
Too many posts.. I need a life!!
Thread Starter
Join Date: Aug 2006
Location: conwy
Posts: 541
Likes: 0
Received 0 Likes
on
0 Posts
toad
still no sound is there a way of testing the siren on its own. i know it has a permanent supply to it and the brown is the trigger wire
#20
10K+ Poster!!
Join Date: May 2005
Location: Cheltenham, Gloucestershire
Posts: 13,798
Likes: 0
Received 0 Likes
on
0 Posts
arm the alarm and unplug disconnect the multi plug to the wiren, it should go off......this may help you determine if the siren is knackered or not.
Thread
Thread Starter
Forum
Replies
Last Post
ai606, alarm, armeddisarmed, backup, battery, fobs, installation, manual, poster, reprogramming, silent, siren, testing, toad, user