Smoker

i have recently put some cams into my 4x4 had it all set up but the car does not have a stable idle. has any one with bd14s have this same issue or is it just normal for them to make the engine to behave like this?

tabetha

Depends what you mean by "all set up", if it was just the cams were put in, you will have a disasterous idle until idle fuelling sorted, as cams a re a hell of a lot hairier.
tabetha

rapidcossie

Up the idle slighty and it should help


my car idles at 1100 and is quite smooth while using cams with more lift and duration that 14's.

saphcossie427

My 4x4 saph runs 14's with verniers and runs pretty smooth on idle (850rpm)
but they were "dialled in" by the guy who mapped it, very slightly lumpy but
hardly noticable

col cos1

iTrader: (5)

my bd14`s make my car tick over lumpy as hell,but i love it that way it sounds great,but the idle only dips and rises ever so slightly