Where is the best place to fit the senders for my guages on my series 2 I've got an oil pressure, oil temp and water temp. was gonna fit the oil pressure into a t piece by the dash oil pressure switch, the oil temp into an adaptor in the sump plug and the water temp as close to the rad in the top hose
Are these gonna be ok or are there ba=etter locations for them?


Cheers
Pete

 

water temp looks ok so does the oil temp, bt the oil pressure i use the take off from round the back of the block for the turbo feed

 

Tahts where i meant i just didn't explain it very well

 

I took mine from where the standard oil pressure switch/light is and just got a 2 way t piece