Has anyong got any pics of a universal or cosworth brake bias box as im looking to change my master cylinder to a bias setup but due to my car being part sierra and a mk 4 escort im not sure what will fit or how they fit any help would be great thanks

 

Im just in the middle of converting a sierra one for someone at the minute. Will post a pic once done

 

ok thanks.

dose anyong know of anywhere that sells universal brake bias boxes?

 

www.obp.uk.net

 

Pics as promised.








Standard Sierra pedal box supplied to us for modding/conversion to bias box. All other components supplied with it but not photographed. IE Master Cylinders, Fixing Kit etc.

Thanks

Tony

 

Just the pics i was after. are the master cylinders on the other side of the bulkhead?

 

Thanks looks good .Ive managed to fit a universal bias box in the engine bay rite behind the pedels it isnt quit finished but ill post some pics when im done

 

When i run the brake lines can i go strait to the calipers with them or would i need to put any sort of valves in befor them???

 

You should be able to run stright to the calipers. Rear discs some time cause a problem with knock off. Mostly on fwd cars. This is when the disc knocks the pads back. All discs knock the pads back to a small degree but doesn't cause a problem.

If the pedal goes soft after cornering the car then you may need to for a pressure retaining valve in the line.

 

Thats what i thought ill see what its like once all fitted if need be ill fit 1 after.Thanks for that