Mk1 Xr2
#1
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Feb 2005
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
hello there just after some advice, i purchased a mk1 xr2 today , to wich i will ad some photos tomorrow on the projects section, but just wondering on the amount of work it will be to fit an rs turbo engine to it? i have been told there is quiet a few alterations? if so what are they if anyone can point me in the right direction?
Thanks
Thanks
![Smokin](https://passionford.com/forum/images/smilies/icon_smokin.gif)
#2
10K+ Poster!!
iTrader: (2)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Have a look here mate
http://www.fiesta-centre.co.uk/fiest...k1kitspage.htm
Also have a look on www.xrtwo.com
You will need a 5 speed gearbox fitting kit
HTH
Brian
http://www.fiesta-centre.co.uk/fiest...k1kitspage.htm
Also have a look on www.xrtwo.com
You will need a 5 speed gearbox fitting kit
HTH
Brian
#5
10K+ Poster!!
Join Date: May 2005
Location: Cheltenham, Gloucestershire
Posts: 13,798
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Its not all that much work, its s tight squeeze though.
Make sure if you carry this out you DON'T use MFI management for gods sake
Probably the hardest part i would say is modding the chassis rail to clear the 5 speed box
Make sure if you carry this out you DON'T use MFI management for gods sake
![Rolling Eyes](https://passionford.com/forum/images/smilies/icon_rolleyes.gif)
Probably the hardest part i would say is modding the chassis rail to clear the 5 speed box
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
Thread
Thread Starter
Forum
Replies
Last Post
wowk
General Car Related Discussion.
4
30-03-2021 07:49 PM