My 2wd saph is missing a bit, I've replaced the phase sensor and dizzy cap and rotar arm, but its still in it, I have a spare set of 4x4 plug leads, should these work alright on my car?

Anything else I should check to try the the miss out, its only a small miss, no backfire or anything....

Thanks lads

 

You will need to change the dizzy to a 4x4 one IIRC to run 4x4 leads, u sure the plug gaps are right?! might be 1 slightly out.

 

Thanks, i noticed the leads are a little different alright, so just as well I checked..

I gapped the plugs (motocraft) to .8? Its a stage one running 14.5 boost, otherwise standard