deankenny

recently all my wires burnt from the ecu, so i had these replaced, and now the car sparks but doesnt actually start, i dont hear the small whizz sound when i turn the ignition on, checked ALL fuses and they r all fine, so though fuel pump so we put a charge to it and we heard it so thats working, maybe its the actual ecu bvut really cxant think of much else any1 else know maybe???

its a 95 1.6 zetec

deankenny

no one know?/??

phil_focus

this sounds very strange. if i were u i would try an get a dealer or good mechanic to have a look. someone reputable!!!

deankenny

thats the thing not got too much money at mo, when we put a live feed to the wire under the seat we hear the fuel pump working, so if its working its gotta be the ecu surely not telling it to work??

phil_focus

try another ecu from a scrappy off an identical car to urs unless u have been running a non-standad unit

phil_focus

how did it go, does it work yet?

could be a bad conection somwhere possibly inside the ECU

Bullett

iTrader: (2)

check the fuel cut off switch hasnt popped itself some how. or did it have an immobiliser on the car when they burnt out?usually these are on the fuel pump system as well,worth a look.
good luck