Franco

iTrader: (2)

AP Disk & Bell fitting guide:

Thought I'd knock this up as it seems a number of people HAVE got it wrong at some stage or other (ME included!).

Right without wanting to teach peeps to suck eggs here goes.....................

*As my kit has been on the car for over a year, its doesn't look too pretty*

Right you receive the following (available from Mike Rainbird or Reyland Motorsports - use the search button!).

FITTING KIT:

24 Allen head bolts (these are a specific length which can only be bought from AP via the above people).
24 Ovalised nuts
48 stainless steel washers
24 AP Bobbins





BELLS:





BRAKE DISKS:



Okay now the CORRECT fitment (as advised by Martin H from Reyland) is as follows:

BOLT, WASHER, BELL, DISK, BOBBIN, WASHER THEN NUT

SOME PICS:







THE CORRECT TORQUE SETTINGS ARE 12NM OR 10.5LB
*DO NOT OVER TIGHTEN THESE AS YOU END UP DISTORTING THE BELLS AND BUYING A NEW SET!!*

THE FINISHED ARTICLE:







I hope this helps............... I know i wish this sort of thing was done for me the first time round!!

Thanks
Jason

(Ps excuse the pics, these were taken on my camera phone!!).

Mike Rainbird

iTrader: (3)

An "idiot's guide" for idiots by an idiot - perfect .

Franco

iTrader: (2)

Oh look all idiots together!!

MATCOS

iTrader: (1)

Thanks Jas, I dont think your an idiot

Franco

iTrader: (2)

Now where the fooking edit tab gone on the top post!